UNSOLVED

Philajenkins

updated

27 years ago

0

7103

May 9th, 2000 20:00

EMM386 not loading

When I boot the computer I get a message that says:

Windows Expanded Memory Manager Ver 4.95

EMM386 not installed - unable to set page frame address - press any key

without me touching the computer after 10-20 sec it says:
EMM386 Sucessfull expanded memory manager installed Then

Expanded memory service unavilable

Total Upper memory avalible 50KB
Largest upper Memory block avalible 50KB
Upper memory starting address D200

In the lod days I woulkd have modifyed the Config.sys as:

dos=high,umb

and
added ram to the EMM386 comand

device=c:\windows\emm386.exe ram

What should I do with win98 so that EMM386 will load and run properly.

  • David .

    2 Intern

    •

    1097 Posts

    119

    0

    Posted May 9th, 2000 22:00

    Try the solution listed here.



  • 119

    0

    Posted May 10th, 2000 00:00

    I do have the geForce card in my system.

    I made the changes you sent me (M6 and when I booted the system froze and had to be powered down. I rebooted several times with the same result. I removed the new options and the system cameup.

    the new entry you gave me is
    EMM386.exe M6 I=E000-E3FF

    M6 is for address range D400 should this be changed to M9 to match the (I) information

    Help!
  • David .

    2 Intern

    •

    1097 Posts

    119

    0

    Posted May 13th, 2000 00:00

    You might try the steps I list here. The two errors are somewhat related.



  • Johnyboy

    5 Posts

    119

    0

    Posted May 27th, 2000 07:00

    No Text