
UNSOLVED
E207WFP
My beloved P992 monitor died. Now have the E207WFP. If I set it to the optimum resolution, the print and icons are so small as to be unreadable. The dropdown boxes are unreadable in apps/progs. Have all the settings that I can find set to large and extra large type. This of course, means that some pages have the type overlapping. Currently set at 1280 X 1024 so I can at least read the type under desk top icons. Monitor is connected to Nvidia GE Force 3 ti500 via the DVI cable. It works, but... is not very comfortable on extended use. No, I don't have 20/20 vision, but does anyone have suggestions as to what I might adjust ? Have been reluctant to make any monitor settings changes using the front panel buttons - I can at least see it as it came out the box!
Have also noted that the disk which came with is Rev. 01, while the #'s on the back of the monitor say Rev. 02. If that matters....
Sure do wish my P992 was reparable....
Thanks for any help and advice.
bobnrobin
Responses (4)
Solutions (0)
Thanks, carogers, for taking the time to reply...
Have tried various resolutions. Main complaint is that all the WXP drop down boxes for all apps, progs, etc., etc. have really FINE type at the higher resolutions. Guess I was just hoping someone might have a way to adjust that aspect...
Thanks so much for your help.
bobnrobin
bobnrobin....I also posted this to the original place you posted before it got moved here
I wasn't sure if you were still monitoring both of these posts, just this one, or just the other one...so, it got posted twice.
STEP 1
Right click on your desktop and click on properties (this brings up the display settings box)
Click on the settings tab
Set your screen resolution to the highest (best for your monitor, video adapter, etc) using the slider bar
Choose the highest color quality for your applications, etc
Click on advanced (a new box opens)
Under DPI setting use Normal size 96 DPI
(you can try different settings later, you may have it at 120 now, change it to 96)
Click OK
For any boxes that open and 1) ask for your confirmation to change the display settings or 2) ask you to restart your computer to apply the new settings.....click yes or OK to all of them now
Your computer will restart and apply the new settings....this is only STEP 1, now proceed with STEP 2
STEP 2
Right click on your desktop and click on properties
Click on the Appearance tab
In the lower left corner of the box it says Font size:
(If your print is really small looking in the menus this is probably set to normal)
Click on the blue arrow to activate the drop down list and choose Large Fonts or choose Extra Large Fonts
Click Apply
Click OK
You should get a blue Windows box in the middle of your screen while the sytem applies the new settings
You can try STEP 2 with the 3 different Font sizes, Normal, Large, and Extra Large. Each time you switch, open a windows application so you can click on the File Menu Edit Toolbar drop down menus and see which one looks best for your eyes :smileytongue:
You can also try different Screen Resolution and DPI settings for other appearance factors, but the one outlined above seems to work best for changing the appearance of the Windows drop down menu lists.
Hope this helps....I just noticed you posted this in February. Maybe you already found a solution?
Thank you Tyler 1447. No, had not been monitoring for quite some time... Mostly adjusted to where it's acceptable. 1280X1024, DPI @ 96, Monitor @ 60hz, and even tweaked some of the settings under Advanced Appearance. Not as perfect as I could get the P992, but useable. I did not try hooking up with the other cable - analog. Hmm, wonder if that'd make any difference.... Don't think I'm going to mess with it, tho'.
Thank you again for taking the time to reply. Much appreciated.

carogers
6 Posts
227
0
Posted February 20th, 2008 13:00
If you have already increased the font size then you are going to have to lower the resolution. The higher the resolution, the smaller everything is. The new monitor has a higher "optimum" resolution than the old one but that can be a problem if your eyes cant see it. Try lowering the resolution until you can read the type. Right-click on your desktop, choose "properties" and then click on the "settings" tab. Use the slider to lower the resolution to something you can see.