UNSOLVED

cheryls04

updated

19 years ago

C

cheryls04

3 Posts

0

2947

August 27th, 2007 19:00

Dimension 8400 will not connect to the Internet.  Diagnos...

Dimension 8400 will not connect to the Internet.  Diagnostic indicates "no network card available"  It was working earlier this month.  Can this be repaired?  What is the cost?  Something I can do at home?
 
  • mombodog

    2 Intern

    •

    12735 Posts

    174

    0

    Posted August 27th, 2007 20:00

    Try this driver reset tool on that 8400. post back with results
     

    <ADMIN NOTE: Broken link has been removed / replaced from this post by Dell>

  • cheryls04

    3 Posts

    174

    0

    Posted August 28th, 2007 01:00

    Can I save the link to a disc and then run from that?  I am not able to access email or Internet on the 8400.  But I have a laptop that I can access.

     
  • maddy78

    132 Posts

    174

    0

    Posted August 28th, 2007 02:00

    Hi,
     
    Yes you will be able to download the drivers save it onto a disk and run it on the dimension 8400. Also you can if you have any light glowing near the ethernet port when you connect the internet cable on the dimension 8400. If you dont have any it could be a problem with the ethernet port on the computer itself.
     
    my other suggesttion to you would be to go for a PCI Network card instead of replacing the motherboard. You would save lots of $$$$'s
     
    Happy troubleshooting
     
    Cheers
    Maddy


    Message Edited by maddy78 on 08-27-2007 11:03 PM
  • mombodog

    2 Intern

    •

    12735 Posts

    174

    0

    Posted August 28th, 2007 15:00

    Thanks maddy78,
     
     
    Cherlys04, Be sure to post back the results of using the driver reset tool.
  • cheryls04

    3 Posts

    174

    0

    Posted September 5th, 2007 22:00

    Thanks for your advice.  My 8400 wouldn't accept the download from the CD so I ended up buying a new Internet card for $40.  That did the trick. 
  • mombodog

    2 Intern

    •

    12735 Posts

    174

    0

    Posted September 5th, 2007 23:00

    Glad you got it resolved.