UNSOLVED

djm227

updated

22 years ago

D

djm227

5 Posts

0

23758

March 3rd, 2005 00:00

dimension 8400 RAM question

i am considering buying the dimension 8400, but first i have a question about the ram
 
in the specs, is says it can hold up to 4 gb of ram, but then in the foot note it says:
" 3 The total amount of usable memory available will be less than 4 GB, depending on the actual system configuration."
 
what does this mean? if i only buy it with 512 can it still be upgraded to 4 gb?  i need to know because im going to need to upgrade to this amount of ram in the future, just dont have enough money for it right now.
  • djm227

    5 Posts

    500

    0

    Posted March 3rd, 2005 01:00

    well the only thing that i have ever used for recording is a mac g5 that my friend has, with 8 gb of ram whitch worked pretty good for recording.  I dont want to go outside of dell though, and since recording requires alot of speed i tought this computer, since its pretty affordable and can get upto 4 gb of ram would be a perfect choice, and 3 is really good to, so im guessing this would be good enough, right?
     
    and yes, i do know one person with this setup with the 8400, im trying to get over to there place as soon as possible to check it out

    Message Edited by djm227 on 03-02-2005 09:36 PM

  • rickmktg

    2 Intern

    •

    11898 Posts

    500

    0

    Posted March 3rd, 2005 01:00



    @djm227 wrote:
    so its still gonna have 4 ports no matter how i order it right? but if i put all 4 in, will it use the 4th for anything?  i need the speed
     
    and can you explain to me why windows only uses three?
     
    Using the Advanced Forum Search on the bottom of this page, you can quite easily find the answer to this often asked question.
     
    There are no ports, there are four slots in 2 pairs of 2.  It's the amount of memory, not the amount of slots, that matters, and Windows only uses 3mb max.
     
    You "need the speed".  Going over 1gb won't give you any speed increase.  Going over 1gb is excessive.  Search around and you'll see posts discussing this.
  • djm227

    5 Posts

    500

    0

    Posted March 3rd, 2005 01:00

    sorry, slots*      and i do need around 3 gb for what im doing, recording studio, which requires alot of ram, or else you get pops and clicks in the tracks, and its really slow without it, thats for the answers everyone
  • djm227

    5 Posts

    499

    0

    Posted March 3rd, 2005 01:00

    so its still gonna have 4 ports no matter how i order it right? but if i put all 4 in, will it use the 4th for anything?  i need the speed
     
    and can you explain to me why windows only uses three?

     

    Message Edited by djm227 on 03-02-2005 09:07 PM

  • rickmktg

    2 Intern

    •

    11898 Posts

    500

    0

    Posted March 3rd, 2005 01:00



    @djm227 wrote:
    sorry, slots*      and i do need around 3 gb for what im doing, recording studio, which requires alot of ram, or else you get pops and clicks in the tracks, and its really slow without it, thats for the answers everyone



    You really want to make sure you're evaluating this right.  I suspect that you'll need faster hard drives, but again I can't imagine that 4gb of memory will get you anything beyond an empty wallet.  Do you know others with the same setup that you can compare to?
  • ejn63

    11 Legend

    •

    87469 Posts

    •

    321256 Points

    499

    0

    Posted March 3rd, 2005 01:00

    What it's saying is that you can install 4G, but XP will effectively use only 3.

    Most versions of UNIX/LInux will use whatever you can install.
  • dotcomeddie

    29 Posts

    500

    0

    Posted March 3rd, 2005 05:00

    Macs in general require more RAM then Windows based machines, based on my experience, so I would check out your friend's 8400 and see what his setup is. I do intensive video editing on my 8400 and XPS Gen4 machine without any problems with only 1GB of RAM.
     
    DCE
  • ask4fish

    14 Posts

    500

    0

    Posted March 3rd, 2005 14:00

    Hey, DCE

    What software ar you using for video?

    I recently ordered an 8400 with 3.2GHz P4 and 1GB RAM.  I plan on using Adobe Premiere Pro.  Is this sufficient, or should I plan on adding more memory soon?  I'm currently using Sony Vegas on my 8250 with 2.4GHz P4 and 512MB which works fine, but the machine is too slow for Adobe.

  • dotcomeddie

    29 Posts

    500

    0

    Posted March 3rd, 2005 19:00

    I'm using Adobe Premiere Pro 1.5.

    My 8400 system has a P4 3.4GHz processor and 1GB of RAM and I haven't noticed any problems while editing. On my previous XPS Gen2 system I had 2GB of RAM and I didn't notice any difference in performance while editing. At least, it wasn't noticeable to me.

    FYI, if you happen to add more memory and it does make a difference, please let me know.

    DCE

  • talmy

    1034 Posts

    115

    0

    Posted March 3rd, 2005 19:00



    @djm227 wrote:
    so its still gonna have 4 ports no matter how i order it right? but if i put all 4 in, will it use the 4th for anything? i need the speed
    and can you explain to me why windows only uses three?

    Message Edited by djm227 on 03-02-2005 09:07 PM





    The reason that only three are available is that Windows XP will only address 4GB and some of that address space is used for accessing peripheral devices (in particular, the display memory). Windows Server OSes and some Linux OSes will use all 4, but they must use memory paging which decreases performance. Thus you only go this route if you absolutely need the maximum memory.

    Note that Dell sells (at least on the SB site) 2GB 533MHz for $320 and 4GB for $889 over the 1GB price. They don't offer 3GB on Dimensions. So the 2nd GB cost $320 and the 3rd costs $669. Very wasteful. Much better is to buy the system with 1GB and buy a pair of 1GB sticks from crucial.com for $464.

    You might also want to consider the Dell Precision Workstation 370, which is available with 3GB, optionally with ECC.