UNSOLVED

vittoria

updated

19 years ago

V

vittoria

39 Posts

0

10456

October 5th, 2007 10:00

Dimension 8200 Video Card Upgrade / Suggestions??

I have a Dimension 8200 with 768MB RAM running XP that currently has an nVidia GeForce3 Ti200 AGP video card.  I'd like to upgrade to a card that supports DirectX9.   Since I've always had nVidia-based cards in the past with no real problems I'd like to stick with that.  Reading through the forum it looks like there's a few options people have listed with success:
GeForce 6800 GS
GeForce 6800 GT
GeForce 6800 GS
GeForce 7800 GS
 
What's the difference between those cards?
 
I was looking at the GeForce 7600 GT, based on another recommendation.  Would this be a good option?
 
I do play a lot of games, but they are not overly intensive.  (Mainly more simple games like the things you'd find at Big Fish Games and Gamehouse.)  
 
My current card does not seem to have it's own fan, but it looks like all the video cards listed do.  Will hooking this up to my power supply be an issue?
 
I'd like something simple to install with little chance of me messing things up.
 
Thanks for any advice-
Vickie
  • SR45

    2 Intern

    •

    12138 Posts

    182

    0

    Posted October 5th, 2007 11:00

    The 7600 GT AGP slot version would be about the best for your system and current power supply.  Not the most powerful you can get for the AGP slot but the best you can without upgrading to another power supply which then adds up in cost for little benefit that can be used for another system someday, since your system is really getting older.
     
    Proper install of a video card found here:

    http://www.hardforum.com/showthread.php?t=965852 

    Step # 1 in doing it the right way…

    Download the most current driver for the video card, and have it placed on the desktop for later install. Try not to use the video card driver from the CD that comes with the card, since they are somewhat out of date. (If it’s an nVidia card, go to www.nvidia.com . ATI card, than go to www.ati.com for the driver download.


    If you are going from an ATI video card to a NVIDIA or vs. versa, one should uninstall the old driver first, from Add/Remove program, than use a driver cleaner, to get all the old driver code completely off the system. Use the driver cleaner twice. If you are going from an nVidia card to another nVidia card (Same for the ATI card), you may not have to use the driver cleaner, but I do to be on the safe side, but many, including me, have not seen any issues with this procedure. Others may have.


    1. Turn off the system, unplug the power cord, and push in on the systems power button for about 5 seconds to discharge the system further.

    2. Remove the old card, and install the new card, firmly. Some have issues with the card, later finding out they did not install the card firmly enough. Now attach, if required, any power cable to the card ( Some video cards, but not all, may need a power connector or Molex Y power cable connected to the rear of the video card), and the other end to a power source, to get the video card to work. Your systems power supply may have this power 4 pin or 6 pin connector.
     
    The 7600 GT card will require a molex Y power cable, and some retail video cards come with this power cable and some do not.  Not too costly, about $3.00 or less if the card does not include the molex Y power cable


    http://www.drivercleaner.net/  Driver Cleaner Pro download site.

    (Now they are charging $10 for the program, where it was free before. You can try to manually clean out the old driver if you wish, but this is still a good program to have around)

    Driver Cleaner 1.5 free edition linked below...

    http://drivers.softpedia.com/get/Other-DRIVERS-TOOLS/Others/Driver-Cleaner-Professional-15.shtml


    3. Plug the power cable back in, and reboot the system. You may or may not notice that the monitor screen is larger now. Not to worry if this happens, since you are now using Microsoft’s Generic video driver, prior to installing the one you downloaded.

    4. Now disable your Anti Virus software, and disconnect the modem at this time

    5. Install the newer video card driver from the desktop, than if necessary, go into the Display Properties to reset the monitor resolution after it reboots. You are almost done. Now restart the Anti Virus program, and connect the modem. (It has been noted from time to time, that the anti virus program may cause problems with the install of some drivers, and in fact some games as well, so it’s best to disable this during the driver install to eliminate that possibility)

    Display Properties for Windows XP.... Right click your mouse on an empty part of the monitor (desktop), click on Properties next, and then click on Settings on top. Now look at the screen resolution bar on the left side. Move it to the proper resolution to the monitor you have. Click on Apply, than OK. The monitor will go blank for a second of two, than another box will appear in the upper left side asking you if you wish to keep the new settings. Click OK. Do so before the second counter goes down, and you have to start over.... Now you are done

  • vittoria

    39 Posts

    182

    0

    Posted October 5th, 2007 15:00

    Thank you.  I had copied your tips earlier from another post.   Would the 7600 GT AGP be an easy card to install?  My current card does not have its own fan.  Is there an open place on the power supply ready to accept the connector the the fan on the new card?
     
    Should I download the latest Forceware on the nVidia site, in this case for Geforce Fx, 6, 7, and 8 version 163.71? 
     
    Vickie


    Message Edited by vittoria on 10-05-2007 12:05 PM
  • SR45

    2 Intern

    •

    12138 Posts

    182

    0

    Posted October 5th, 2007 15:00

    Yes, it is very easy if you just take your time and do what the procedures written suggest.

    Make sure you download the newest driver from nVidia's web site, but this in not mandatory. You can use the driver supplied with the card when you get it if you wish.
     
    Link below is to the 7 series video card and windows xp operating system
     
    Don't forget about the molex Y power cable.  Some cards give you these and some do not.  Try to find one that does to save you time