LoneWolf3574

updated

18 years ago

0

7864

January 23rd, 2009 22:00

Dimension 4300 Problems

Ok, so I'm doing my brother a favor & replacing his old HDD with a new one and upgrading his CPU from a 1.5Ghz to a 1.8Ghz (I had it laying around).  His original problem was that it would only boot as far as the logon & then completely restart when you tried to login or let it set for a couple of minutes, I figured it was his HDD since it was making a loud whining noise up until it did the hard reboot.

I've got WinXP Pro SP3 installed, I decided to let XP check/update the video driver through the device manager since he was running such an old video card (GeForce 3 series).  After the update installs, everything goes black on the screen, the power button starts flashing amber, and I can't get the system to restart.  I unplug it & let it set for a few minutes figuring something had overheated (it is about 7 years old after all).  I plug the power back in after looking around inside for hotspots (none found curiouser & curiouser), push the power button, I hear and see all the drives spinup & test, but no POST (hmm).  There was no beep, nothing, there weren't even any lights on the keyboard, just the amber (aux power) & green (system power) LEDs on the motherboard and all the fans were spinning (that's really weird).

First I tried to reset the BIOS by removing the battery for 5 minutes (after I unplugged from the outlet & discharged the PSU), no success.  Then I unplugged everything & removed all PC cards, leaving just the power to the motherboard, the cpu, & the memory in place.  I got 2 short beeps and the 4 LEDs (ABCD) on the back are green green green yellow, I have no idea what those are all about but I thought they might be important.  Watching the LEDs before the beeps occur, I get YYGG, GYYG, GGYY, YGGY, and finally GGGY as it beeps 2x.  I am assuming the first 4 are tests & the last 1 is what the problem is.

PLEASE tell me I'm wrong in thinking the motherboard just died.

Dimension 4300 - 1.8Ghz CPU, 512Mb PC133, 80Gb WD HDD, WindowsXP Pro SP3, SB Live! Platinum, Cnet NIC, Nvidia GeForce 3 series

  • 252

    1

    Posted January 24th, 2009 14:00

    No answers?  That's cool.  I just figured it out.  When I put the old video card back in originally, the 4 LEDs were YGYG.  I happen to have an old AGP ATI video card sitting around (Radeon 64Mb All-In-One I think) and installed it.  Now I can get into the BIOS.  It took a few tries, ok about a dozen, before I figured out that when I reset the BIOS, I also had to set the drives to AUTO and OFF for the installed and empty points on the IDE cable or nothing would start.  Lesson learned, always keep a few old PC parts around, you never know when they'll come in handy and save you money.  :emotion-2: