UNSOLVED

billwnh

updated

19 years ago

B

billwnh

20 Posts

0

42357

April 15th, 2008 21:00

Digital speakers won't work with Xfi card

Hi all

 

I need a little help here. I am the proud new owner of an XPS 630 ! Arrived yesterday ! I ordered this system without speakers as I have a great set of speakers from my old system. The speakers I have are Creative/Cambridge Soundworks FPS2000 Digital. On my old system which is a Dimension 8300 running XP and  a Sooundblaster Live audio card they worked great.

 

My new 630 is running Vista and I have the upgraded Soundblaster Xfi Extreme Music card. I cannot get any sound to come from these speakers. I have an old pair of cheap labtec analog speakers that work fine with this new system as well as my headphones, but not the FPS 2000 speakers. I spent an hour and a half with the Dell XPS preferred tech support last night only to have her finally give up and tell me that the speakers I have are incompatible with this card ? This makes no sense to me. If you go the Creative web site and look at the Extreme music card on their site it says it has digital out, DTS, Dolby Digital etc...The tech told me this card has no digital output. We tried everything and couldn't get it work. So now, unless I can come up with a fix I am forced to either return the sound card and get another or get new speakers.

 

Has anyone run into a similar issue and know a work around ?

 

Thanks in advance for your input.

 

Bill 

  • Davet50

    6 Operator

    •

    14442 Posts

    1315

    0

    Posted April 15th, 2008 23:00

    you need to go into the speaker set up and enable the digital output..

    bring up the contol panel. select the sound icon..click on speakers.click properties

    go to the custom tab and put a check in the digital box..

  • billwnh

    20 Posts

    1315

    0

    Posted April 15th, 2008 23:00

    Creative Live Cam

    Creative Media Soource 5

    Sound Blaster X-Fi

     

    All of the above are under the Creative folder in the start menu

     

    When I click on speakers, under sounds in control panel, I then click on properties and get

    General, tone, levels,sound blaster, advanced 

  • billwnh

    20 Posts

    1315

    0

    Posted April 15th, 2008 23:00

    Hi Dave, there is no custom tab in properties under speakers.

     

    Which port(color ?) should I plugging the digital cable from the speakers in to ? 

  • Davet50

    6 Operator

    •

    14442 Posts

    1315

    0

    Posted April 15th, 2008 23:00

    you need to change the flexi jack to digital..it should be the same as the mic jack..this is normally a dual purpose jack..

     

    what is under the advanced tab on the speaker set up...

     

    Can you switch modes to games aduio creation. and entertainment?

    Message Edited by Davet50 on 04-15-2008 08:56 PM
    Message Edited by Davet50 on 04-15-2008 08:57 PM
  • Davet50

    6 Operator

    •

    14442 Posts

    1315

    0

    Posted April 15th, 2008 23:00

    What creative apps do you have listed on the start menu

    and What tabe do you get when you click on the properties in the speakers.

     

    not totaly sure yet about the jack looking for info..

  • billwnh

    20 Posts

    1315

    0

    Posted April 15th, 2008 23:00

    Under advanced I have Default format and Exclusive Mode

     

    Flexi Jack mode has two options

     

    Line or microphone. microphone is currently checked 

  • Davet50

    6 Operator

    •

    14442 Posts

    644

    0

    Posted April 16th, 2008 00:00

    how about in the game mode...

     

    Also look in your start menu under the creative and the soundblaster xf-i click on that and see what pops up..

    Dell has sure made a mess of this..I agree you may or may not have an Xtrem musice card..

  • billwnh

    20 Posts

    1315

    0

    Posted April 16th, 2008 00:00

    Dave this is a Dell card. This is the $100 upgrade on the Vista based system.
  • billwnh

    20 Posts

    644

    0

    Posted April 16th, 2008 00:00

    There is a digital i/o tab in the mixer view but all it shows is

     

    Bit Matched:

        Enable bit match recording

     

    Digital in: unknown or invalid signal 

  • Davet50

    6 Operator

    •

    14442 Posts

    644

    0

    Posted April 16th, 2008 00:00

    this is what i find from the online manual from creative..

     

     

    Connecting Digital Speaker Systems

     

    Select the Digital I/O option in Entertainment Mode, Game Mode and Audio Creation Mode when connecting external digital speakers that accept stereo PCM or compressed Dolby Digital/DTS Bitstream from the S/PDIF output.

    Note