
UNSOLVED
Dell Screen Then Error Screen.
At times, when I start my computer, the Dell Boot Up Screen, appears for a second, then it goes into a error screen, stating that a driver or software, have not loaded right. Can one please help me? And thanks. I have a Dell Dimension 2400.
Am not sure how to find the tag, so I just typed in a tag, below.
Lil Lost
Responses (13)
Solutions (0)
Hello Hanspuppa, I am trying to be specific, yes I am referring to the Dell Logo Screen, then it goes into another screen, with the error message, then it goes to the Windows XP Screen. It usually goes right into the Windows XP Screen, without showing the Dell Logo Screen, but at times it goes to Dell Logo Screen, then to the error message screen, then to Windows XP screen, and logs on then. What I am worried about is that one of these times, it may not log into my Windows XP screen, to load up my computer. I hope this better explains what type of trouble, I am having.
Thanks
Lil Lost
Hello Lil Lost, That helps a great deal. Thanks.
If it is going out of the Dell Logo screen, it is trying to locate certain hardware on the system, and may be having difficulty finding it.
There may be some hardware device that is not working as it should.
I suspect a memory fault, but I would try to run a hardware test in an effort to determine if there is any hardware defects.
When you see the Dell Logo screen at bootup, locate the F12 option on the screen and press F12 and run a hardware test to see if the system can identify any defective hardware.
The 2400 series may not have the hardware test utility, but have lights instead, at the rear of the system.
Here is a link to the Dell site for an explanantion for the light codes.
When the system fails, you may want to check the light codes for any information that may be available from the diagonostic lights.
This test can almost always verify that the hardware is free of defects.
If it is, then we can start looking at a software issue.
Hope this helps.
shesagordie
12 Elder
•
46017 Posts
1357
1
Posted December 23rd, 2008 13:00
Hello Hanspuppa, You are welcome. This does help. But I have questions.
But how do I find the F12 option on the Dell Logo Screen? To push F12. Or just push F12, when I see the Dell Logo Screen, at bootup.
Thanks.
Lil Lost
Lil Lost
When you start the system, the F12 option should be shown in the top right corner of the screen, when you see it, push the F12 key immediately.
You can find more information on using Dell Diagnostics HERE
Bev.
Hello Hanspuppa, That helps and thanks, next time it happens, I will do that. I will print out what is written here, so I don't forget how to. And then what happens, after I push F12, hopefully, it will tell me what to do.
It will be kind of hard, to copy the web sites, that you and bev, have mentioned.
Thanks, bev, too.
Thanks, again.
Lil Lost
Am still confused some, do I need to highlight something first on the Dell Logo Sreen? If so, then how? Or do I just pust F12 the minute I see it? Have mentioned upper right hand corner, do I need to highlight that first? If so, then how? The sites that you have given me, say 2 different things. So which is right?
Thanks alot!
Lil Lost
shesagordie
12 Elder
•
46017 Posts
1357
1
Posted December 24th, 2008 14:00
Am still confused some, do I need to highlight something first on the Dell Logo Sreen? If so, then how? Or do I just pust F12 the minute I see it? Have mentioned upper right hand corner, do I need to highlight that first? If so, then how? The sites that you have given me, say 2 different things. So which is right?
Thanks alot!
Lil Lost
Lil Lost
No, there's no need to highlight, when you see the F12 prompt on the monitor's screen, just push the F12 key immediately.
Please name the two sites you see.
Bev.

Hanspuppa
799 Posts
1357
1
Posted December 23rd, 2008 11:00
Hello Lil Lost, When you mention "Dell Boot Up Screen", are you referring to the first Dell Logo screen, or another screen.
The reason I ask, is that if it is the Dell Logo screen, the system would not have loaded any drivers or software at that point.
It is simply checking the hardware on your system.
However, if it is the Windows Startup screen, that appears when the operating system is loading drivers and other certain operating software to boot into the desktop, and there is an issue with some of the drivers or software, you might get an error.
Could you please be more specific, and maybe we can help.
Thanks