UNSOLVED

kawalkowski111

updated

19 years ago

0

13325

December 19th, 2007 16:00

DELL - PLEASE GIVE SUPPORT FOR THE PENRYNs 52XX and 54XX PROCESSORS on 690

TO DELL support team
Please come up with a solution for supporting the 1333MHz FSB versions of the 52XX and 54XX XEONs on the 690 platform. I am sure a lot of people will be interested.
 
 
690 user
  • Dev Mgr

    6 Operator

    •

    9308 Posts

    •

    3 Points

    474

    0

    Posted December 19th, 2007 22:00

    As it needs a new chipset, I believe Dell has a fix;

  • dangthang

    26 Posts

    474

    0

    Posted December 25th, 2007 01:00

    I thought I remember reading after I bought my 690 that some versions would support quad core. Anyway it would be cheaper to just go for the MB and CPUs instead of another identicle case etc
    ========
    Only a motherboard with  MY171 version has full support for Quads of the 53XX series. I learned this the hard way. If you have a motherboard version DT029 (I have tested this version as well) or the any other version (havent tested the third version) you probably want to go with a pair of 5160 - they run at 3000MHz and you should get most out of that system.

    Posted elsewhere on the board


    Message Edited by dangthang on 12-24-2007 09:38 PM
  • AVITWeb

    24 Posts

    474

    0

    Posted December 26th, 2007 23:00

    I see several types of processors out there, but one thing worries me that I do not know about. The 54xx that I was looking at is listed as 80W...Is there a limitation on the motherboard for the wattage of the processors?
  • dangthang

    26 Posts

    474

    0

    Posted December 27th, 2007 01:00

    the 3.0 5160 uses 80 watts also, so I doubt it would be a wattage problem. BUt the version of the MB would be an issue with the 54xx's if doesn't have the right numbers on the tag
  • Dev Mgr

    6 Operator

    •

    9308 Posts

    •

    3 Points

    474

    0

    Posted December 27th, 2007 11:00

    It's also a Voltage issue. Newer processors tend to run at a lower Voltage, which not all VRMs/motherboards can drop down to.
  • AVITWeb

    24 Posts

    474

    0

    Posted December 29th, 2007 15:00

    I'm currently running the 5140 @ 2.33 but in the future I might want to step up to a 53xx. So basically, with my MY171 motherboard, I should be able to do that without worrying about problems with power, correct?
  • dangthang

    26 Posts

    474

    0

    Posted December 29th, 2007 16:00

    From what I gather that is correct. My board won't support the quad but looks like your will. Not really sure if it's worth it or not at this point because not alot of SMP apps out there.
  • 474

    0

    Posted January 23rd, 2008 14:00

    I tried the xeon E5410 on a Dell 690 with ODT029 , dell 690 with  MY171,  a supermicro X7DWA-N all and Tyan  (cant remember the board #), I measured the voltage being supplied to the processor and every time I was getting 1.19V. So all boards were capable of supplying power to the Xeon E5410 at the exact same voltage so its not that.
     
    The Tyan board had the same chipset as the Dell so I dont know why they do not support the new processors other than the BIOS has no microcode for the new processors.
     
    Either way the power supply is able to go to the lower voltage as both processor family 51xx/53xx and 52xx/54xx use the same intel power supply spec (with added future lower voltages for the 52xx/54xx family - but not used in currently produced batches of processors.)
     
    Hope this helps someone.
     
      


    Message Edited by kawalkowski111 on 01-23-2008 11:12 AM
  • AVITWeb

    24 Posts

    474

    0

    Posted January 23rd, 2008 15:00

    I know the last BIOS update did say that it added processor compatability, but I don't think it said which ones...which BIOS are you running?
  • 106

    0

    Posted January 23rd, 2008 16:00

    At the time I was testing A06 but A07 only includes these changes:
     
    1. Vista SP1 support

    2. Miscellaneous fixes for PCI and PCIE devices

    3. Fixed POST message with a single Intel(R) Xeon(TM) processor installed in
    the CPU1 socket