UNSOLVED

Qz05

updated

21 years ago

Q

Qz05

69 Posts

0

18514

May 30th, 2005 19:00

Changing my Dell computer case.

I wondering how easy it would be to change my Dell case.  I know the motherboard and PSU are likey to be non standard so i was think of getting a new PSU and motherboard that are compatible with my existing parts and then putting it all into my new case.
 
I think this would work but i am unsure about the processor.  Would changing the processor to a non-dell motherboard work?
  • ejn63

    11 Legend

    •

    87469 Posts

    •

    321256 Points

    434

    0

    Posted May 30th, 2005 19:00

    The processor will work with any board that accepts that type.

    What won't work: you'll need a new heatsink-fan, as the Dell unit won't fit a standard bracket on a standard board.

    You will in all likelihood need to do a complete reinstall of Windows if you buy a new mainboard. Afterward, if you use the Dell OEM CD, you will be required to call Microsoft to activate Windows. Whether they let you do that is open to question - some have reported success, but others have reported they do not. If they do not, you will need to purchase a retail copy of XP. The OEM CD is tied to the Dell BIOS on the original mainboard.
  • Qz05

    69 Posts

    434

    0

    Posted May 30th, 2005 20:00

    I am aware i would need a new CPU fan shoudlnt be much of a problem.  The main reason i want a new case is because of heat and airflow problems.

  • Qz05

    69 Posts

    434

    0

    Posted May 30th, 2005 20:00

    Yeah...el cheapo i will noto.. hmmm..
     
    Come to think of it i might aswell upgrade my Cpu in the process of changing cases.
  • Daddyjaxx

    1081 Posts

    434

    0

    Posted May 30th, 2005 20:00

    Just be sure to get a decent case.  You could wind up with the same problem if you go for el chepo.
  • jimi2

    16 Posts

    434

    0

    Posted May 30th, 2005 21:00

    Qz05,
     
    What type of system do you have?   A few of us have had a significant improvement of the air flow through the Dimension 4700 case by reversing the CPU/System fan to blow hot air out of the case instead of blowing hot air in.  Look at the "Dimension 4700 heatsing/fan question..." thread for more information.
     
     
  • Qz05

    69 Posts

    434

    0

    Posted May 30th, 2005 22:00

    I have the Dimension 8400.
  • CatoftheNight

    1 Rookie

    •

    523 Posts

    434

    0

    Posted May 31st, 2005 02:00

    I was under the impression the 8400's had fairly decent airflow?
     
     
    If you wanted to change cases you only need a new motherboard and Power Supply. Or, you could be really cool and Ghetto-dize it. Aka. Duct tape and Zip-Ties. Using those two things the Dell components will fit into any case...