
UNSOLVED
Can't boot with USB port in use
I have an "old" Dimension XPS450 running Windows 98SE with a 1GHz processor and several other upgrades upgrade installed. It has been working fine for the past couple of years, but last week suddenly stopped booting. No new hardware or software has been added in the past several months.
By trial and error, I've determined that the PC will boot to Windows if there are NO devices plugged into either of the two USB ports, but as soon as a device is plugged in to either port, the system hangs at the Dell logo and won't even do the POST. If I unplug the USB devices (in my case a USB hub on my monitor and an HP external CD/RW) the system boots up without any problems.
I have tried new USB cables, tried pluggin in different USB devices, gone into the BIOS and checked the USB ports and can't find anything that works - if anything is plugged into a USB port, the system hangs.
I'm at a loss as to what to do or try - Any ideas or suggestions would be much appreciated.
Thanks -
Ernesto
Responses (3)
Solutions (0)
Thanks for the response. All three devices I have tried to use in the two USB ports are "powered." I've plugged in an HP CD/RW, an Intel Phoneline Network adapter, and my monitor has a USB connection and is a USB "hub" with 4 ports - I asume the latter is powered.
You've given me an idea though, I'll try plugging in a "non powered" USB device (e.g. Card Reader) and see if the system still won't boot. Maybe it has something to do with the electrical power "from" the devices being plugged into the ports.
I've owned PC's for over 20 years and never encountered this particular problem before.
Nesto

MichPhreak
49 Posts
333
0
Posted May 24th, 2004 08:00