
UNSOLVED
S
Stealthpilot
1 Message
0
8752
May 13th, 2006 02:00
Can't adjust volume on "Line Input" on 5100 with Sigma Tel Audio. HELP!
Trying to bring audio into my PC from an external source via the "Line In" (blue) plug. My onboard sound is Sigma Tel Audio. The problem is I can't adjust the volume. I can only mute. The line input (Input Monitor) slider appears, but is grayed out and not enabled. I downloaded the latest
Sigma Tel Audio driver: R114282.EXE with no improvement.
Anyone seen this before? Is my only choice to abandon my on-baord sound?
Responses (3)
Solutions (0)
Alan Erickson
6 Posts
134
0
Posted May 13th, 2006 18:00
If you search the board, you'll see that others have the same problem also. Here's a screen shot of how mine looks grayed out also.
http://deskmedia.com/~erickson/sigma.png
I wouldn't hold my breath waiting for Dell to fix it, but that's just my opinion. I ended up installing a Turtle Beach Santa Cruz that I had laying around and that fixed t he problem, but I hated to give up the PCI slot. Hopefully they'll fix it before I need the slot for something, but again, I'm not expecting much. Sigma Tel is apparently little help either.- I have a SigmaTel STAC 9200 and the Input Monitor is greyed out for me as well. I wish Dell allowed a way to lower the Input Monitor volume level. It's such a simple option that I've taken for granted over the years of using computers with sound cards. There is no way to adjust the audio coming in from line-in and mic except from the recording settings, and I already have the line-in and mic set to the absolute lowest it can go. The audio coming in from both line-in and mic is just too high. I have to manually set my computer speakers to the lowest setting in order to confortably listen to my tv tuner card.

fireberd
11 Legend
•
33399 Posts
•
112848 Points
134
0
Posted May 13th, 2006 09:00
There is a separate set of volume controls for "recording".
Go to the Volume Control Panel then click on "options" then "properties' Click on Recording and the Volume Control panel will then show the various sound sources for "recording".