
Solved!
Go to SolutionCannot run PXE on optiplex 990
Hello mates,
I have corrently a desktop optiplex 990 and i am corrently inside a company. All the machines can run on pxe mode, that way i can put easely an image of win7 and gogogogo.
I can put a image on HP 6550b, 6520b and 6310b and old old old IBM R60.
AND i can put the image via PXE on the new dells latitude E5520 but on the new optiplex 990 i cant.
I did a BIOS update, and i enabled on the bios the PXE mode but still not working eny ideas??
Responses (10)
Solutions (0)
steven _king
1 Message
2936
0
Posted May 25th, 2011 09:00
I am having the same issue the funny thing is it is only on one perticular switch. A cisco 4507 it dosn't work while directly connected to the 4507 but if you connect the 990 to a voip phone and the voip phone is connected to the 4507 it works wonderfully. An older laptop works fine directly connected to the 4507. Also the 990's work fine while connected to any other model of switch with a phone or without. Any body have any ideas?
rainmakers99
1 Rookie
•
3 Posts
2936
0
Posted July 19th, 2011 08:00
Try disabling PoE on the switch port(s). It seems like the 990 are either timing out or not negotiating the PoE. for the Pxe booting.
We have just found the same issue on the new 4500E's, we have been pxe booting 990's for a couple of months without issue on 6500's as it took me a while to get an intel driver that would work with both 990's and 6320's I would like to know if anyone has had a resoulution to this issue. In winpe2.1 I am using the Intel 82579LM - e1c6232.sys (vista driver) V11.10.84.0 without issue on the 6500's so I don't think it is a faulty nic driver.
I suggest you speak with your Dell account partner, there is a fix but as it is not released for production as yet I cannot post here. They may be able to help you, it will be a BIOS upgrade.
When it is released for production I will post here - due October
Had same problem on Optiplex 990, with BIOS A07:
PXE boot with "LOCALBOOT 0" hang after message
Booting from local disk...
without the expected "Exiting PXE" message.
Workaround seems to be as per
http://sourceforge.net/projects/freeghost/forums/forum/730844/topic/4560984
using:
kernel chain.c32append hd0
instead of LOCALBOOT 0 in the pxelinux config file.

Bec11
7 Posts
2316
1
Posted October 26th, 2011 00:00
BIOS A07 has been released which fixes the issue with the 990's on cisco 4500e switches, can be found on the dell website.