UNSOLVED

silver184

updated

21 years ago

S

silver184

6 Posts

0

1646

September 15th, 2005 04:00

Any help is appreciated, Thanks

     I have a Dimension 8300. Im a very avid computer gamer + web surfer(unfortunatly without protection.. or so it seems) for about a year. My computer took a long time to boot up one morning, loading desktop icons extremly slow.. this was very odd because its never happened.  I decided to reboot it just to be sure this wasnt a new threat.  What i got was a blinking underscore on a black screen.  I was completely surprised by my computers refusal to boot up.  After some researching, i took some advice and reseated my hard drive along with some reconnecting.  It didnt work so i tried reinstalling windows xp, but each time i try at some point of the installation i get a blue screen windows error.  I am now completely clueless to what im dealing with. And not knowing how to access BIOs isnt helping. : (
    Any help would be appreciated. Thanks
  • AskDV

    74 Posts

    287

    0

    Posted September 15th, 2005 14:00

    Silver,

    Run the Harddrive Diagnostics.

    The steps are as follows.

    1. At the Dell BIOS splash screen, press the ++ keys at the same time.
      The computer beeps once to acknowledge that the BIOS hard drive diagnostics have been initiated and the following message appears:

      IDE Diagnostics running, please wait
      Primary

      Drive 0: (Drive Model) -
    2. The test may take up to three minutes to run the diagnostics (the time is dependent upon size and speed of drive).
      When the diagnostics are complete, one of the following messages appears:

      IDE Diagnostics running, please wait

      Primary

      Drive 0: (Drive Model) - Pass
                  Drive 1: No IDE Device

      Secondary
      Drive 0: (CD-ROM Model) - Diagnostics not supported
      Drive 1: No IDE Device

      Test complete, Press to reboot
    3. Press the key and restart the computer.

      NOTE: A Primary Drive 0: failure message may also appear. Proceed to the If the Hard Drive Diagnostics Reports Failures section. An error code does not indicate a definite drive failure.

    If the Hard Drive Diagnostics Reports Failures Call up Dell Technical Support for assistance.

    ~DV

     

  • silver184

    6 Posts

    287

    0

    Posted September 15th, 2005 18:00

    Drive 0: (Drive Model) - Fail  : (


  • AskDV

    74 Posts

    287

    0

    Posted September 15th, 2005 19:00

    Get Hard drive replaced from Dell, In case you have valid Warranty.