
UNSOLVED
P
purplediane
12 Posts
0
6353
February 15th, 2002 07:00
8100 + 5 USB devices?
I have a Dell 8100 (Win2K, 1GHz, 512M RAM, 60 GB disk, NVidia TNT) that has 4 USB ports. When I got it (Jan 2001) I was annoyed that all the USB ports are in the back, so I bought a self-powered USB 4-Port Hub (Belkin F5U014) so that I could easily switch my Digital Media reader from it to my laptop. I never managed to get it to work and gave up since I didn't absolutely need it and was busy with other things.
Now I have more USB devices (5 total) and I'm trying to use the Hub, but can't seem to get it to work. I have the Hub plugged into the computer's USB port #1 with 2 self-powered devices plugged into it and various other devices plugged into the other USB ports on the computer. It seems to me that this should work. (Maybe?) But I cannot Hotsync with my new Handspring (gets almost done then "disconnects") or use the other device on the Hub (scanner). Also, since adding the Hub, when I go into the Device Manager, the Digital Media reader has a problem icon next to it and gives an error saying that it can't work because some component is missing (I think it's an error 31; I'm not logged in as administrator so can't see it right now). It is still plugged into the same USB port on the computer; I didn't change anything related to it.
If I have a Hub, must it be the only "controller" for multiple USB devices? In other words, if I use a Hub, must it be the only USB device actually plugged directly into the computer? In which case, my 4-port hub won't help me & I need to get a 7-port hub, yes? Or is there some software driver(s) that will fix this?
Any help would be appreciated; I'm tired of crawling around behind the computer to get at the cables to swap the USB devices.
Thanks,
diane
Now I have more USB devices (5 total) and I'm trying to use the Hub, but can't seem to get it to work. I have the Hub plugged into the computer's USB port #1 with 2 self-powered devices plugged into it and various other devices plugged into the other USB ports on the computer. It seems to me that this should work. (Maybe?) But I cannot Hotsync with my new Handspring (gets almost done then "disconnects") or use the other device on the Hub (scanner). Also, since adding the Hub, when I go into the Device Manager, the Digital Media reader has a problem icon next to it and gives an error saying that it can't work because some component is missing (I think it's an error 31; I'm not logged in as administrator so can't see it right now). It is still plugged into the same USB port on the computer; I didn't change anything related to it.
If I have a Hub, must it be the only "controller" for multiple USB devices? In other words, if I use a Hub, must it be the only USB device actually plugged directly into the computer? In which case, my 4-port hub won't help me & I need to get a 7-port hub, yes? Or is there some software driver(s) that will fix this?
Any help would be appreciated; I'm tired of crawling around behind the computer to get at the cables to swap the USB devices.
Thanks,
diane
Responses (4)
Solutions (0)
- Just a thought. My 8100 came with a performance keyboard with 2 USB ports in the back of it which I regularly use for my zip drive. Check your keyboard and see if it has these ports.
Mecadon
Dell Dimension 8100
Windows ME with BIOS A09
1.5 Gh Pentium 4
256 Mb RAM PC800
40 Gb hard drive (7200 rpm)
32 Mb Nvidia video card (tv out)
Soundblaster Live sound card
16x DVD ROM drive
16x10x40 CD-RW drive
17" Trinitron
AL speakers with subwoofer
Epson 777 printer purplediane
12 Posts
203
0
Posted February 16th, 2002 00:00
mecadon wrote:
- Just a thought. My 8100 came with a performance
- keyboard with 2 USB ports in the back of it which I
- regularly use for my zip drive. Check your keyboard
- and see if it has these ports.
Wouldn't that be sweet! But no, I must have the old non-performance :-) keyboard. Actually I guess it is the quietkey one or something like that.
diane
-
- Mecadon
-
- Dell Dimension 8100
- Windows ME with BIOS A09
- 1.5 Gh Pentium 4
- 256 Mb RAM PC800
- 40 Gb hard drive (7200 rpm)
- 32 Mb Nvidia video card (tv out)
- Soundblaster Live sound card
- 16x DVD ROM drive
- 16x10x40 CD-RW drive
- 17" Trinitron
- AL speakers with subwoofer
- Epson 777 printer
purplediane
12 Posts
203
0
Posted February 16th, 2002 01:00
fishnbanjo wrote:
- Diane,
- I ran 3 Belkin Hubs in a daisey chain for a
- few years on a home brewed PII 233 with only 2 USB
- Ports and it operated well on 98SE.
Can any USB Hubs be daisy-chained, or do they need to be a certain kind of Hub? And here is a really dumb question: by "daisy-chained", do you mean that each hub is plugged into a port of another hub, and only one hub is plugged into the computer? Just making sure I understand what you all mean by daisy-chain... It's one of those terms that everyone assumes that everyone else understands, but since I have no actual personal experience with a "daisy-chain", I'm not 100% sure that what I think is a daisy-chain is really correct.
- I should think that
- if you were to remove all of your USB connections
- including the hub and power down the PC and bring it
- back up without any USB devices then check your USB
- root devices in Control Panel to see if there is
- anything amiss. If everything reports correctly I'd
- probably defrag the system and once complete power
- it down again.
I'll have to dig out my PS2 mouse in order to bring up the system with no USB devices. :-)
When I go to defrag, it tells me I don't need to. I'm only using about 11 Gb of my 60 Gb disk.
- Once this is completely operational
- plug the power supply into your Belkin Hub and
- attach the USB interface to it, place the cable on
- the USB Bus on the PC first.
Does it matter which USB port I plug it into? Is there some kind of order or hierarchy to the USB ports or are they all the same?
I will give your suggestions a try and see what happens.
thanks!
diane
- Then after your OS
- alerts you that the Belkin Hub has been detected and
- the drivers have been loaded recheck the condition
- of everything in the Control Panel. Since you need
- to move your media reader from the laptop to the PC
- I'd make sure this was the first item I placed on
- the hub and then revisit the Control Panel to ensure
- the device is acting properly ie no yellow question
- mark which would mean the device is there but W2K
- has not come to terms with what it is. If everthing
- is fine from there then mark the port that is being
- used by the media reader and always use that port
- when you replace it. Media Readers sometimes have
- software that shuts them off prior to your removing
- them and this is a precaution to protect the media
- from electrical spikes etc. which would damage them.
- I see no reason why this won't work on your system
- unless the USB Port on your PC is faulty or the
- Belkin Hub. If you have the time to test the hub out
- I'd plug it into the laptop to ensure it is capable
- of performing correctly or you could spend too much
- time running in circles. I had no problem whatsoever
- transferring the daisey chain of hubs to my XP
- platform. Best of luck and don't let the gremlins
- wear you down.....

fishnbanjo
261 Posts
203
0
Posted February 15th, 2002 09:00
I ran 3 Belkin Hubs in a daisey chain for a few years on a home brewed PII 233 with only 2 USB Ports and it operated well on 98SE. I received my first ever pre-built PC from Dell
(I've always built my own for over 14 years) just before Christmas and you will see the configuration below. The Belkin Hub is very nice and I have had great success in 98 SE and 98FE and 95SR2 and even an ME to 98FE laptop to Dell 8100 USB network I setup for a friends business. I should think that if you were to remove all of your USB connections including the hub and power down the PC and bring it back up without any USB devices then check your USB root devices in Control Panel to see if there is anything amiss. If everything reports correctly I'd probably defrag the system and once complete power it down again. Once this is completely operational plug the power supply into your Belkin Hub and attach the USB interface to it, place the cable on the USB Bus on the PC first. Then after your OS alerts you that the Belkin Hub has been detected and the drivers have been loaded recheck the condition of everything in the Control Panel. Since you need to move your media reader from the laptop to the PC I'd make sure this was the first item I placed on the hub and then revisit the Control Panel to ensure the device is acting properly ie no yellow question mark which would mean the device is there but W2K has not come to terms with what it is. If everthing is fine from there then mark the port that is being used by the media reader and always use that port when you replace it. Media Readers sometimes have software that shuts them off prior to your removing them and this is a precaution to protect the media from electrical spikes etc. which would damage them. I see no reason why this won't work on your system unless the USB Port on your PC is faulty or the Belkin Hub. If you have the time to test the hub out I'd plug it into the laptop to ensure it is capable of performing correctly or you could spend too much time running in circles. I had no problem whatsoever transferring the daisey chain of hubs to my XP platform. Best of luck and don't let the gremlins wear you down.....
banjo
Dimension 8200
P4 1.8GHz
512 Mb PC800 RDRAM
60Gb HDD (Maxtor)
64mb GeForce2 MX w/TV out card
15" Flat Panel
16-10-40 CDRW (Samsung)
16x DVD (NEC)
Dell Quietkey keyboard
Microsoft USB Infra Wheel IntelliMouse
Telex Microphone
Altec Lansing Wireless Speaker System
SB Live
Cambridge Sound Works 2000FPS speakers
HP 4L Laser Printer via USB extension
HP 1315 PhotoSmart Printer w/SmartMedia drive
UMAX Astra 3400 Scanner
10/100 PCI Fast Ethernet NIC
3 Belkin USB Hubs
eUSB SmartMedia Adapter
Logitech WingMan Force USB
Logitech Webcam Pro 3000
Westfall DSL Modem via Verizon
Win XP Home Edition
Win XP Sm Bus Office
Norton Utilities System Works
Zone ALarm
IE 6.0, Netscape 4.7 and 6.2 and Real1Player
Message Edited on 02/15/02 06:13AM by fishnbanjo
Message Edited on 02/15/02 06:18AM by fishnbanjo