UNSOLVED

hz4np1

updated

22 years ago

H

hz4np1

1 Message

0

40171

January 4th, 2005 17:00

4GB RAM in Precision 670 not used by Windows XP Prof.

All
A new Precision GX670 can see only 2.88GB from 4GB total under WinXP Prof. SP2. The BIOS shows that all 4096MB is available. When run winmsd - Total RAM installed = 4096. I have tried to run this boot.ini as DELL standard:

multi(0)disk(0)rdisk(0)partition(2)\WINDOWS="Microsoft Windows XP Professional" /fastdetect /NoExecute=OptIn

and tried this one boot.ini:

multi(0)disk(0)rdisk(0)partition(2)\WINDOWS="Microsoft Windows XP Professional" /fastdetect /PAE

this unfortunately nothing changed. I searched MS KB and /PAE should solve the issue but unfortunatley it doesn't ;-( Does anyone have a clue what's up?

Service Tag CHXRD1J
Express Service Code 27206016967
Computer Model Precision WorkStation 670
BIOS Vendor Dell Inc.
BIOS Version A02
BIOS Date 09-02-04
Windows Version Microsoft Windows XP Professional


Available Memory 85.48 %
Page File Size -766.2Mb
Available Page File -580. %
Virtual Memory 2047.8Mb
Available Virtual Memory 98.00 %
Memory Slot 1 [DIMM_1]  1024Mb
Memory Slot 2 [DIMM_2]  1024Mb
Memory Slot 3 [DIMM_3]  1024Mb
Memory Slot 4 [DIMM_4]  1024Mb

 

  • mnguyen281

    425 Posts

    571

    0

    Posted January 15th, 2005 23:00

    32bit processors and OS can only address up to 4GB of memory - what that means is that you do in fact have 4GB of memory but some of it is used up by addressing the actual hardware that you have in your system.  the only way to be able to utilize all 4GB of memory is to have a 64bit processor - which you do have - and a 64bit OS.  the only 64bit OS that is currently not in beta and is shipping is Red Hat Enterprise Linux 3.
  • 571

    0

    Posted January 18th, 2005 14:00


    mnguyen281 wrote:
    32bit processors and OS can only address up to 4GB of memory




    Well, technically this isn't true. That's what *they* want you to believe :)
    x86 processors since the first pentium can adress up to 64 GB, which is the maximum linux (32 bits) or windows servers systems can adress. 32-bit PowerPC processors can even adress more than that. This is possible because the MMU works with page numbers instead of absolute adresses and any recent OS relies on the MMU for adress translation. But for obvious reasons ($$) Microsoft disabled this capacity in professionnal or home editions of windows. The /PAE switch is not available in windows XP. Actually, the capacity to access large adresses also depends on your chipset, but in your case it shouldn't be a problem.

    I have exactly the same problem with a Precision 370, althought I have access to 3GB (which is a little more than 2.88GB) on the 4GB. I suppose installing windows 200x advanced server would solve the problem, but it's too expensive (about $4000). You could also install linux, a 64-bit version would be best, but a 32-bit version would work too (you might have to recompile the kernel with the right option, though). You can also try disabling some stuff in your BIOS (useless things like PCI hot-add which takes loads of memory), but it seems that Dell disabled this kind of possibility in the BIOS of recent machines.
  • 571

    0

    Posted January 20th, 2005 14:00

    I have noticed some of the same issues that you are describing on a Precision 370.  I am assuming the 670 is using the new Intel EMT 64 processor(s).  The Precision that I am using has 4GB of RAM and it was only displaying 2.88GB in Windows XP SP2.  I enabled PAE and it now shows 3.00GB.  I think that we are out of luck until Windows XP 64 is available later this year. However, if you open System Information the Total Physical Memory = 4096MB.  I have not done any testing yet to see if you can use all of the RAM above 3.00GB.
    As a side note this is an ESRI GIS workstation and I have had some trouble loading software with DLL's and other errors.  Found out this was the DEP option in the Boot.ini.  If you have trouble with this you can disable it with /NoExecute=AlwaysOff.  You can then install the software and change it back when you are finished.
  • anuraj1

    97 Posts

    571

    0

    Posted January 23rd, 2005 07:00

    I know this isn't a real fix or anything, but if any of you are willing to see if the 64-bit windows will let you see all of your memory, you can download it for free. It will work for one year after you install it, and if it works, I am sure you will be buying it when it is released to the public anyway. Here's a link:

  • 571

    0

    Posted January 24th, 2005 16:00

    I did load Windows XP Professional x64 bit.  It only shows 3.00GB of RAM too.  This workstation has 4096MB of RAM installed.  So is this a Dell issue after all?

     

    Shaun

  • anuraj1

    97 Posts

    571

    0

    Posted January 24th, 2005 22:00

    As I understand it, having 4 GB or RAM but windows not showing it is a problem with the 32 bit operating system. So if the 64 bit operating system is not showing it either, then I would be willing to think that it must be a hardware issue. I will read up more about it and if i see something that explains it then I will post.
  • 572

    0

    Posted January 25th, 2005 07:00

    I confirm it seems to be a bios/hardware issue : linux 64-bit only displays the same 3.0 GB on a precision 370 with 4 GB.
  • 572

    0

    Posted January 25th, 2005 12:00

    We have five of these workstations (370's) and all of them are displaying the same 3.00GB of RAM even if we are using a x64 bit OS such as Windows XP x64 Bit or Red Hat Fedora Core 3 x64 Bit.  I have updated the BIOS to the A03 version with no change.  This is not a good situation!  I will be calling support soon if no fix is created very quickly.
     
    DELL!  We pay lots of money for this much RAM!  Please respond to this forum.
     
     
    Shaun
  • NickDYLLC

    3 Posts

    572

    0

    Posted January 26th, 2005 20:00

    I just put together a custom computer for this buisness I work for. P4 3.4 Ghz, Serial everything, PCI Express blah blah. Anyways, I installed 4BG of ram as well and Win XP PRO SP2 is having the same issue. I believe, like the other are saying it has today with the 32 bit OS and I think the 32 bit Processor limits it aswell. If anyone has a fix or way around the 2.87 GB barrier carried by windows please Email me.  Thanks
     

    Message Edited by NickDYLLC on 01-26-2005 04:10 PM

  • 323

    0

    Posted January 26th, 2005 22:00

    Nick

     

     
    If you review the previous post we are getting these results with a 64 bit OS as well as 32 bit OS.  This is where concern is arising.