
UNSOLVED
Re-posting AURORA R4 WILL NOT COLD BOOT
Re-posting this since there were NO replies. If there is no solution, PC is going back to DELL.
AURORA R4 WILL NOT COLD BOOT. I cloned the original HD to a Kingston V200 SSD. I get error on cold boot: "Reboot and select proper boot device or Insert boot media in selected boot device and press a key". If I warm reboot CTRL-ALT-DEL from this screen-->PC posts, and then boots to Win 7 fine! In BIOS Setup these are the lists for:
Boot Order-- 1st SSD Kinston, 2nd DVD Drive, 3rd USB CD drive, 4 USB HD, 6 Network. Set to Legacy boot. Tried UEFI with same result. SATA PORT 1- Kingston SSD, SATA- 2, 3, 4 NOT PRESENT. SATA 5 -DVD drive, SATA 6- NOT PRESENT.
Have read MANY posts about this Cold Boot problem on Alienware desktops and laptops, with NO SOLUTION. Tried all possible fixes in BIOS Setup, flashed new A10 BIOS. NONE works. Called DELL Tech Support and Software support who REFUSE to help because SSD is not from DELL. Well, if a DELL customer spends this amount $$$$ on an Alienware R4 PC, it should WORK, and they should be allowed to upgrade and add an SSD of any brand.
IMO it is NOT a hardware problem, since when I warm reboot it loads Win 7 fine from the Kingston SSD. Also the SSD loads Win 7 and all programs MANY TIMES faster than the supplied 2TB Hard Drive.
Any suggestions?
Responses (4)
Solutions (0)
Milena M458
6 Operator
•
2699 Posts
590
0
Posted December 2nd, 2013 11:00
Hello AlanIM!
And have you tried doing a clean installation of windows on the SSD? Something cloning a hard drive might give you instability.
The first step is to find out if the problem follows the Kingston v200 to the other machines, or if it's isolated to the Aurora R4. It's tempting to just work on the Aurora, but trust me ... you are just "spinning your wheels" until you determine which "machine" is broken.
If the problem stays with Aurora, you could try things like:
- A different bay
- Moving to Sata-2 port instead of preferred Sata-3 port.
- Try a thicker gauge high quality Sata3/600 certified cable... Things like that
It would also be good to know if drive detects in BIOS (at Post) on a cold boot.
Dell Rockstar
Microsoft Windows and Apple iOS Developer (Retired)
- Like many of you, I can appreciate a good game-engine.
- I answer questions here, but I'm not a Dell employee.
- Consider giving posts you like a "thumbs-up"
- Posting models-numbers and software versions speeds trouble-shooting.
- Click "Mark as Accepted Answer" on any post that answers your question best.Thanks to Tesla1856! Replaced Kinston V200 SSD NOW with a 64GB CRUCIAL M4 from older Dell PC. Cloned whole disk with USB based Norton Ghost 2003. Well--R4 boots right to Win 7..and Faaaast! Will put the Kingston SSD in another PC or laptop. AS SSD Benchmark shows:
AS SSD Benchmark 1.7.4739.38088
------------------------------
Name: ATA M4-CT064M4SSD2 SCSI Disk Device
Firmware: 0309
Controller: iaStorA
Offset: 1024 K - OK
Size: 59.62 GB
------------------------------
Sequential:
------------------------------
Read: 504.11 MB/s
Write: 104.67 MB/s

Tesla1856
10 Wizard
•
18086 Posts
•
71947 Points
590
0
Posted December 2nd, 2013 11:00
Not an easy problem to troubleshoot, but it is common. Doesn't seem to be restricted to Dell computers.
https://www.google.com/search?q=ssd+won't+cold+boot&sourceid=ie7&rls=com.microsoft:en-us:IE-Address&ie=&oe=
Is the Kingston v200 running the latest BIOS (or the best reported stable)?
Does the v200 consistently cold-boot in another computer?
Just a reminder ... I think v200 uses Jmicron controller. v300 and newer Kingston SSDs now use SLI SF-2281.
Dell Rockstar
Microsoft Windows and Apple iOS Developer (Retired)
- Like many of you, I can appreciate a good game-engine.
- I answer questions here, but I'm not a Dell employee.
- Consider giving posts you like a "thumbs-up"
- Posting models-numbers and software versions speeds trouble-shooting.
- Click "Mark as Accepted Answer" on any post that answers your question best.