UNSOLVED

jimt91

updated

15 years ago

J

jimt91

9 Posts

0

33968

January 12th, 2012 07:00

Help connecting monitor to m11x(VGA)

I have the m11x and it won't connect to my external monitor the screen just stays black. I've checked all of my settings... My computer even recognizes the external monitor as being there. I even tried 3 different monitors and cables so that isn't the problem. It worked months ago, but now when I start up my computer the external monitor will work for a few seconds at start up and then goes black. and only the laptop screen will work. 

  • Bouddha

    35 Posts

    943

    0

    Posted January 13th, 2012 03:00

    seems to be a graphic driver setting that needs to be changed.

    Go check your nvidia control panel and see how the 2nd monitor is managed.

  • jimt91

    9 Posts

    965

    0

    Posted January 13th, 2012 15:00

    How exactly would I do that? Sorry : /

  • C_ronic

    431 Posts

    965

    0

    Posted January 13th, 2012 17:00

    i know this might sound dumb but did you hit    fn+f8?

  • jimt91

    9 Posts

    965

    0

    Posted January 14th, 2012 06:00

    fn+f8 increases the volume?

  • C_ronic

    431 Posts

    965

    0

    Posted January 14th, 2012 08:00

    on most laptops it forces the multiple monitors and cycles through them if you hit it more than once. You do have a key though that should do that. Its fn+ whatever f key has 2 squares on it. Represents two monitors. just go through all the f keys (f1,f2, etc.) while holding fn if you dont see it.

  • jimt91

    9 Posts

    965

    0

    Posted January 15th, 2012 06:00

    Yeah I tried that, it's like it recognizes that it's there it just doesn't show up.

  • jimt91

    9 Posts

    965

    0

    Posted January 16th, 2012 18:00

    bump

  • Tesla1856

    10 Wizard

    •

    18086 Posts

    •

    71947 Points

    965

    0

    Posted January 16th, 2012 19:00

    With all the suggestions (all were good and correct ... maybe re-read this thread), it should be working by now.

    When in Windows, go to your Control Panel. If they both show up ... make one the Primary and "Extend" the desktop to the other.

    Dell Rockstar

    Microsoft Windows and Apple iOS Developer (Retired)
    - Like many of you, I can appreciate a good game-engine.
    - I answer questions here, but I'm not a Dell employee.
    - Consider giving posts you like a "thumbs-up"
    - Posting models-numbers and software versions speeds trouble-shooting.
    - Click "Mark as Accepted Answer" on any post that answers your question best.

  • jimt91

    9 Posts

    965

    0

    Posted January 19th, 2012 10:00

    Like I've said, I've tried everything suggested here. I would always connect my monitor a few months back, and I still use the hdmi to connect to my tv  and that works, but the VGA won't for the monitor. It shows up for a few seconds, if that, at the start screen and then goes blank and my computer even recognizes the monitor connected, but nothing displays on it.

  • jimt91

    9 Posts

    165

    0

    Posted January 22nd, 2012 13:00

    so no one has had this problem?