UNSOLVED

dasteve2

updated

21 years ago

D

dasteve2

4 Posts

0

13467

May 5th, 2006 18:00

fglrx inspiron 600m works but display is annoyingly fuzzy

I have been using Ubuntu 5.10 on my laptop for a few months and everything has worked well but I just realized I've been using the generic ati driver. After following instructions to set up the latest fglrx driver from the repos, after much work, I got the driver to work. It works well in that it is faster, and 3d acceleration works, but the display is very blurry, it hurts your eyes after looking at it for too long. Below is my xorg.conf. Thanks for any help

Section "Files"
FontPath "/usr/share/X11/fonts/misc"
FontPath "/usr/share/X11/fonts/cyrillic"
FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/X11/fonts/Type1"
FontPath "/usr/share/X11/fonts/CID"
FontPath "/usr/share/X11/fonts/100dpi"
FontPath "/usr/share/X11/fonts/75dpi"
# paths to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/CID"
EndSection

Section "Module"
Load "GLcore"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
EndSection

Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc104"
Option "XkbLayout" "us"
EndSection

Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "Emulate3Buttons" "true"
Option "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"
Identifier "Synaptics Touchpad"
Driver "synaptics"
Option "SendCoreEvents" "true"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "HorizScrollDelta" "0"
EndSection

Section "Device"
Identifier "ATI Technologies, Inc. Radeon Mobility 9000 M9 (R250 Lf)"
Driver "ati"
BusID "PCI:1:0:0"
EndSection

Section "Monitor"
Identifier "Generic Monitor"
Option "DPMS"
HorizSync 30-85
VertRefresh 60
EndSection

Section "Screen"
Identifier "Default Screen"
Device "ATI Technologies, Inc. Radeon Mobility 9000 M9 (R250 Lf)"
Monitor "Generic Monitor"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1400x1050"
EndSubSection
SubSection "Display"
Depth 4
Modes "1400x1050"
EndSubSection
SubSection "Display"
Depth 8
Modes "1400x1050"
EndSubSection
SubSection "Display"
Depth 15
Modes "1400x1050"
EndSubSection
SubSection "Display"
Depth 16
Modes "1400x1050"
EndSubSection
SubSection "Display"
Depth 24
Modes "1400x1050"
EndSubSection
EndSection

Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "Synaptics Touchpad"
EndSection

Section "DRI"
Mode 0666
EndSection
  • erroneus

    10 Posts

    424

    0

    Posted May 5th, 2006 20:00

    The only way to get "fuzzy" display on a laptop is to run at too low or high a resolution for the physical display. Check what the active dimensions are. Also, if I recall correctly, try doing some CTRL-ALT-+ (number pad) or - (number pad) to make it cycle through screen resolutions.

    Uhm... I don't have the ability to use my numlock... weird... just now noticed it. If anyone knows the answer to that mystery, I'm running FC5 as stock as stock can be + fglrx for my ATI video card.
  • jongkind

    85 Posts

    424

    0

    Posted May 5th, 2006 20:00

    I'm also using Ubuntu and I had the same problem. This thread helped me:

    http://ubuntuforums.org/showthread.php?t=83973

    Especially the part describing the "Adding custom modeline" appeared to be usefull.

    Furthermore font rendering in Dapper is much better.
  • dasteve2

    4 Posts

    424

    0

    Posted May 5th, 2006 20:00

    thanks for the reply, but its not the resolution, its runing at the native 1400x1050, I can tell because everything is the same size, i measured :)

    any other ideas??
  • dasteve2

    4 Posts

    424

    0

    Posted May 5th, 2006 21:00

    thanks much, this looks promissing, do you know what the vert and horiz sync rates are for the inspiron 600m? or where i could find out?
  • jongkind

    85 Posts

    424

    0

    Posted May 5th, 2006 21:00

    Here is the owners manual of your system:
    http://support.dell.com/support/edocs/systems/ins600m/en/index.htm#printed_documentation

    This is not always completely helpfull, so you may want to use this link to calculate the sync rates:
    http://www.dkfz-heidelberg.de/spec/linux/modeline/
  • dasteve2

    4 Posts

    424

    0

    Posted May 6th, 2006 00:00

    thanks for the suggestions jongkind, i tried following that post and putting the sync rates in my xorg.conf but it had no effect, things are still very blurry when using the fglrx driver as compared with the generic ati driver, i've seen this post on a few other messageboards and there is never a solution, someone please help!
  • 424

    0

    Posted May 15th, 2006 17:00

    It is because you're using Gnome. :)

    Serously, is the fuzziness the same at all resolutions?