UNSOLVED

KIW72

updated

7 years ago

K

KIW72

13 Posts

0

2765

November 5th, 2019 10:00

Windows 10 Pro upgrade made Dell Latitude E5430 unusable

Hi, I've just upgraded my Dell E5430 i5 8GB 320GB to Windows 10 pro 64 bit from Windows 7 Pro 64 bit. I downloaded ISO from Microsoft and installed via a USB. However since installation the startup is very, very slow, seeming hanging on a black screen with timer and when does get to signin/login screen the laptop is more or less unusable as System is using 100% disk! The Windows image version is 10.0.18362.418. Update seems to be working ok. Have downloaded Dell Support Assist tool, with all issues found and fixed. Have also run fixes for corrupt/missing Win 10 files, which has found and corrected those, all have made no difference! Why has Windows 10 install ruined a great laptop! Please advise!

  • nyc10036

    6 Operator

    •

    5640 Posts

    2505

    0

    Posted November 5th, 2019 12:00

    I have done upgrades from Windows 7 Pro to Windows 10 Pro by inserting a USB created using Microsoft's Media Creation Tool.  It is possible to do, and it is still free.

    After I did that, I went online and let Windows 10 install all the updates that it wants.

     

    .

     

  • Mary G

    6 Operator

    •

    20095 Posts

    2508

    0

    Posted November 5th, 2019 12:00

    Did you do a clean install? That means selecting a custom installation that allows you to first delete the partition with windows 7 (and everything else so make copies of files) and then install windows 10 on the unallocated partition. There is no upgrade path from win 7. You have to do a clean install. 

  • KIW72

    13 Posts

    2476

    0

    Posted November 6th, 2019 01:00

    Hi Mary G, many thanks for the reply, in my original request for help, I mentioned I did a clean install via usb from ISO download direct from Microsoft. I also did a custom install and deleted old Win 7 install. Still no good.

  • KIW72

    13 Posts

    2479

    0

    Posted November 6th, 2019 01:00

    Hi nyc10036, thanks for the reply, that is the method I used to install, then I connected to internet via ethernet cable for updates. There is obviously some process/file/driver that is corrupt but it is finding the one. Have looked on task manager, nothing running there at startup to cause any issues.

  • nyc10036

    6 Operator

    •

    5640 Posts

    2460

    0

    Posted November 6th, 2019 06:00

    I have the E6230 which is the smaller screen version of your laptop.

    I installed Windows 10 v1803 last year and had no problems. Then I put back the hard drive that has Windows 7.

     

    Anyway, if you think Windows 7 was better, use your service tag to get Dell's ISO of Windows 7.

    You should have made an image back up of your Windows 7 before doing this update.

    I have done the Windows 7 to Windows 10 upgrade on various laptops HP, Dell, ASUS, and Acer, and have not had any problems.

     

    .

  • U2CAMEB4ME

    6 Operator

    •

    6245 Posts

    2444

    0

    Posted November 6th, 2019 13:00

    Welcome to the Dell Community  @KIW72 

    Did you run any Diagnostics on the HDD before installing W10???

    You could have installed a corrupt image.

    Did you try a second install???

    Best regards,

    U2

  • KIW72

    13 Posts

    2395

    0

    Posted November 11th, 2019 03:00

    Hi, many thanks for the reply.

     

    I've tried to install many times with no obvious improvement. Tried custom install, delete everything from disk, tried standard install and delete previous installation after, non seem to make any difference.

    However I have a Dell OptiPlex 3010 i3 8gb, I bought off ebay recently with WIN 10 Pro 64 bit (but an earlier iso 10.0.17763.771) and that runs brill, a few seconds start up no performance issues and is on a SATA hard drive. Perhaps it is the later iso I'm trying to install causing issues?

  • KIW72

    13 Posts

    2396

    0

    Posted November 11th, 2019 03:00

    Hi Mary G, yes I did a clean/custom install, makes no difference. I've tested the hard drive, reports healthy no errors/bad sectors. There seems to be many people having these issues slow boot/slow performance after latest Win 10 install plus due to system process 100% on disk, yet no one seems to have an obvious solution?

     

    Many thanks for the reply.