
UNSOLVED
Closed
Dell Command Update fails to install Critical updates.
Latitude E6540 Dell Command update pop up advise two critical update available. I let it run but it fails. Downloads them (175.4 MB) creates a restore point, starts to install but fails. This happened twice today. Any advice?
Tmwgray
This conversation is no longer open for comments or replies and is no longer visible to community members.
Responses (40)
Solutions (0)
DELL-Alasdair R
6 Operator
•
754 Posts
25792
0
Posted February 7th, 2018 04:00
Can you tell us what version of Command Update is installed, what OS you are running and what the failed updates were? I'll look into it for you.
Thanks.
DELL-Alasdair R
6 Operator
•
754 Posts
25796
0
Posted February 7th, 2018 08:00
Thanks for the details. I managed to replicate the error here with MNK54 so I tried to download and install it manually. It failed with a network error, so it looks like the issue is on the server side of things rather than with Command Update.
I'll raise a request to get this investigated but in the meantime, can you try them manually yourself and let me know how you get on?
We are experiencing this same issue. Mostly OptiPlex 3040 models affected, running Win 10 x64 1709. DCU v2.31. Tried removing and reinstalling DCU, and any number of other 'hacks' found on the internet. Sill can no longer download files. Looking for some assistance on what to try next...and what to avoid trying. Thanks.
Ok. So. After struggling for about a week, the updates just mysteriously started to work this morning...the day after I posted for help. Not all of them are succeeding, but they are all downloading now - they're just not all successfully installing.
I'm going to keep on this and see how long it lasts.
That was pretty short-lived.
I was able to get each of the systems I'm working directly with to download an update or two today, then they all went back to the same failures.
Not all the systems failed on the same packages. But all the ones that failed say "HTTP: The underlying connection was closed. The connection was closed unexpectedly." and "FTP: Unable to connect to the remote server."
I had not done anything overnight with these computers. Just logged in this morning and tried again. It worked, now it doesn't work.
Hello TFS-Keith,
Since I raised the original query on 7 Feb I have not seen any solution posted and you are the first one seemingly having the same issue. I am not in the least technically minded but when the system advises Critical Updates are available I install them (or try to). I sent details requested back to the Moderator DELL-Alisdair R and he replicated the error and was going to raise a request to get it investigated. I tried to install again and the same thing happened. Perhaps it is still under investigation.
Since the first failure I have not been advised that any updates are available so after reading your post I asked Dell Command to check for updates and it came up with 2 Critical ones which I tried to install. Same thing happened, downloaded, created a restore point, started to install but failed.
I should add that my system seems to be running OK with no problems so I will wait and see if a solution is found.
tmwgray
DELL-Alasdair R
6 Operator
•
754 Posts
25683
0
Posted February 28th, 2018 08:00
Hi Guys,
Apologies for the trouble this is causing you both. Yes, the issue is still under investigation. Can you confirm that downloads and/or installs fail if downloading the same updates directly from support.dell.com??
Thanks
Hello DELL-Alasdair R
Went to Support.dell.com. Chose the Drivers & Updates tab. Looked at list of drivers for Latitude E6540 and expanded each of the 2018 ones looking for the reference MNK54 driver and 8MJFN application as those were the ones that failed to install. Could not find them. Input my Service Tag. Recommended to let system be analysed and it came up with 2 downloads so I clicked to download them. See below. Drivers found, Download complete installation in progress. Remained as in progress for 55mins after which I cancelled.
You have2 driver updates ready to download and install.
2 - Automatic installation Driver updates found.
Select all
Network |Intel 7260/3160 WiFi Driver (206 MB)View details
Download
Chipset |O2 Micro OZ777xxx/OZ621XX memory card reader Driver (24 MB)View details
Download
Restart required
I do not know if these are the downloads that failed in the first instance. If not can you point me precisely to where they are and I will try to install them. I'm not very sure about this technical stuff.
Tmwgray
For each of the 5 failed components that one of our PCs is still experiencing, I was able to search for their 5-character identifiers and downloaded each of them manually through Internet Explorer from the support.dell.com site...I did not install them though. I immediately went to DCU and tried again, but it still failed to download all 5, all with the same HTTP and FTP messages as I initially posted.

tmwgray
1 Rookie
•
37 Posts
25804
0
Posted February 7th, 2018 04:00
DELL-Alisdair R thanks for the reply.
The info you asked for is as follows
Dell Command Update Vers 2.3.1
Win 10 Pro x 64 Vers 1709 Build 16299.214
The auto update showed 3 updates available. 1 Optional 2 Critical
The Optional RJF4F Application seems to have installed OK
The Critical ones were 8MJFN Application and MNK54 Driver.
Both of them have a yellow triangle with exclamation mark in the Activity Log
Tmwgray