I made the dubious decision to install Windows 11 on my perfectly running Lat 7400 2-in-1 with Windows 10 Pro installed. I destroyed the disk completely using Hirens Boot CD first, then used a Rufus burned 25H2 image of Win11 Pro to install on the laptop - all good; then i made the mistake of uninstalled Edge with win11 tweak tools, which made Onedrive refuse to run full stop. after 3 hours of fighting, i decided to rebuild; Using the same USB installer i had originally. windows installed, then rebooted and....nothing. power cycled and it then went into a boot loop of pre-boot assessment screen, before reporting that there were no bootable drives available. booting from the usb drive also refused and caused the same response; booting into the uefi screen i saw the error "bootmgr has a security validation or internal error"
I then tried to boot from the Hirens USB - same problem; then i tried a USB device imaged using the MS media tool - same outcome each time. i even pulled the battery and CMOS, reset everything to defaults, still the same problem. I then pulled the drive, scanned it on my desktop and then destroyed the partitions; reinstalled in the laptop and....no change. In the end i DISABLED secure boot in the BIOS - and Windows 11 (Rufus) installed and rebooted fine. after updates installed, i turned secure boot back on and everything remained fine. then i decided to install a completely virgin win11 image from the ms tool - installer ran no problems, deleted all drive partitions, and got to the reboot stage after installing.....and back to the pre-boot check screen and no OS available.
Tearing my hair out now - machine has the latest 1.39 BIOS installed this week (not sure if it was before or after the first reinstall...) and i'm out of ideas. even tried creating images on 3 different machines, with the same problem again.
Has anyone else had this issue? Win11 is meant to do a hard NO is Secure Boot is disabled, but for me it's the only way i can get any OS on it.
One thing worth noting; if there is an OS on the machine and secure boot is enabled, then it will boot from the same USB drives it later refuses?
Verify computer passes ePSA-Diagnostics (outside of Windows). NVMe-SSD should be "DiskPart cleaned" back to un-initialized/raw. BIOS set to UEFI-Mode and AHCI - Some users report that SecureBoot needs to be OFF during actual Windows install, but I always leave it ON. Only that one SSD installed/connected for now F12 on boot to boot USB-FlashDrive from microsoft.com Media Creation Tool https://www.microsoft.com/en-us/software-download/windows11
Install Windows to un-allocated/un-partitioned space - It will initialize the NVMe-SSD as GPT, and format as NTFS Refrain from installing any drivers from support.dell.com (ie, no "heavy" Dell Utilities or Intel driver-suites) - Maybe Intel-Chipset (if your computer is very new) otherwise ... - - Try to get all drivers from Windows-Update and nvidia.com - I don't use SupportAssist
You do this to see if "the hardware" is good after-all.
After your Device-Manager is clean, you should be able to re-enable SecureBoot if you disabled it earlier during initial install.
Notes: 1. If semi-forcing Windows-11 onto an older (non- UEFI) Legacy BIOS computer, the Windows installer might decide to Initialize the main drive as MBR instead. 2. While sometimes not obvious, it IS still possible to install Windows with only a Local (Admin) Account.
(edited)
Dell Rockstar
Microsoft Windows and Apple iOS Developer (Retired) - Like many of you, I can appreciate a good game-engine. - I answer questions here, but I'm not a Dell employee. - Consider giving posts you like a "thumbs-up" - Posting models-numbers and software versions speeds trouble-shooting. - Click "Mark as Accepted Answer" on any post that answers your question best.
Yesterday I had a very weird issue with Secure Boot thing during installation of Windows 11. Apparently during reinstalling system from the beginning through Media Creation Tool (usb flash drive), everything went right until reboot after 100% installation of Windows (the blue screen thing). It appeared on the PC that there's no bootable device nor system on PC nor even letting me reinstall system again. Ended up I had to check and change settings in Secure Boot in BIOS to let it work again. I don't know why it happened. On the other hand I realised that turning off the option "RAID Intel RST (IRST)" thing in BIOS allowed me to reinstall system without seeking the driver for NVME hard drive for allowing reinstalling system. I don't know yet but I'm gonna also test if it'll fix the issue that I constantly had bluetooth/usb dongle interruptions along with any usb flash drive/sd card/pendrive plugged in. Sometimes PC tended to just not connect the device to it, sometimes PC decided to remove all data from it, or setting it RAW partition or just breaking it in any possible way.
Anyways, today is a good day to test it as I was fixing system late evening yesterday. Thumbs up that finally issues will be resolved maybe? I wanted everyone who has this issue, to know that there's this little option that helps to recover your PC from this weird issue. So far I did read on Dell Optiplex site that someone had this issue with no bootable device like 2 weeks ago and that was the solution. So far the issue with no bootable device appeared on two PCs from my side and they are different brands and different processors. So, anyways, I hope people will comment on this post and we'll figure out what could have been the cause of these issues and if it's really a solution what I did or it's just temporary fix? I suspect some kind of update that caused it but it's so weird that earlier few months ago everything was all right with reinstalling system from the same USB flash drive without changing anything in BIOS.
To add something - my USB flash drive was turned into bootable system by Media Creation Tool and nothing was changed since 25H2 system appeared (and always worked!)
When this happens on your Optiplex 7010 Micro (and other machines), did you notice whether the EFI boot entry (“Windows Boot Manager”) is still present in BIOS after the failed reboot, or is it completely missing/invalid?
Also, are you installing in pure UEFI mode with GPT every time, or is there any chance the installer sometimes falls back into mixed/legacy behavior when IRST is enabled?
Windows Boot Manager was there but was no system, nor possibility to reinstall system (saw usb there but it was 'no bootable device'). So far as I noticed through different manufacturers, it's "well known issue" I guess since the Secure Boot update?
Tesla1856
10 Wizard
•
18086 Posts
•
71947 Points
0
0
Posted May 26th, 2026 19:07
Don't use Hiren or Rufus.
Verify computer passes ePSA-Diagnostics (outside of Windows).
NVMe-SSD should be "DiskPart cleaned" back to un-initialized/raw.
BIOS set to UEFI-Mode and AHCI
- Some users report that SecureBoot needs to be OFF during actual Windows install, but I always leave it ON.
Only that one SSD installed/connected for now
F12 on boot to boot USB-FlashDrive from microsoft.com Media Creation Tool
https://www.microsoft.com/en-us/software-download/windows11
Install Windows to un-allocated/un-partitioned space
- It will initialize the NVMe-SSD as GPT, and format as NTFS
Refrain from installing any drivers from support.dell.com (ie, no "heavy" Dell Utilities or Intel driver-suites)
- Maybe Intel-Chipset (if your computer is very new) otherwise ...
- - Try to get all drivers from Windows-Update and nvidia.com
- I don't use SupportAssist
You do this to see if "the hardware" is good after-all.
After your Device-Manager is clean, you should be able to re-enable SecureBoot if you disabled it earlier during initial install.
Notes:
1. If semi-forcing Windows-11 onto an older (non- UEFI) Legacy BIOS computer, the Windows installer might decide to Initialize the main drive as MBR instead.
2. While sometimes not obvious, it IS still possible to install Windows with only a Local (Admin) Account.
(edited)
Dell Rockstar
Microsoft Windows and Apple iOS Developer (Retired)
- Like many of you, I can appreciate a good game-engine.
- I answer questions here, but I'm not a Dell employee.
- Consider giving posts you like a "thumbs-up"
- Posting models-numbers and software versions speeds trouble-shooting.
- Click "Mark as Accepted Answer" on any post that answers your question best.