There seems to be absolutely no information out there regarding 2280 size M.2 SSD compatibility for the Inspiron 16 5640 (which was introduced at least 6 months ago). It's very odd since the bracket appears to be the length of a 2280 SSD, but Dell options for ordering only include 2230 size SSDs. I would assume that a 2280 SSD is compatible (as has been the case for pretty much every other Dell laptop using this type of longer bracket that a shorter 2230 SSD is attached to.
However, unlike most other Dell laptops from before 6+ months ago there appears to be no service manual made available for the Inspiron 16 5640 and only a short video about replacing a 2230 size SSD. So what's going on? If a 2280 size SSD is actually NOT supported that is a severe limitation for anyone who would want a large (4+ TB) SSD as no 2230 size SSDs are available in those sizes.
As a more general question, where are the service manuals for laptops released this year? Dell has (up until 2024) been very good at making repair procedures and detailed specifications available for their products.
The service manual is still there -- inside the owner's manual. It does appear there is space for a 2280 SSD, but curiously, Crucial lists only 2230 drives -- the bracket that holds the drive may not permit a 2280 drive to fit.
Whether there's a bracket that from another system that will work is open to question -- the Inspiron 7640 takes 2280 SSDs. Perhaps a bracket from that model will allow a 2280 drive in the lower end 5000 series system.
@ejn63 I do see what you mean regarding the owner's manual. It still doesn't seem to be quite as detailed as what used to be called the service manual, but I guess it covers the bare minimum.
It's unclear to me whether a bracket is even necessary for 2280 SSDs. In a fair number of other models the screw just holds the longer 2280 SSD directly without a bracket. Usually brackets for the 2280 SSDs are simply for thermal management (Dell calls them "thermal shields"). Anyone have a part number for the Inspiron 7640 thermal shield (2280-specific shield)? Because of course there is no info on that either...
Just following up here with results. I did special order the 2280 SSD bracket used by the 7640 from AliExpress, but the thermal cooling with Dell's bracket doesn't really do much. I ended up getting some full-size copper SSD heatsinks on Amazon (a 1.5mm thick with fins for the top and a 1mm thick smooth for the bottom) and cut them down in size a bit to make sure the heatsinks didn't interfere with the connectors. Of course there are also thermal pads between each heatsink and the SSD. Both heatsinks get locked in place with rubber rings (included with the heatsinks) with the SSD sandwiched in between. It's been working great for the last couple months.
It's unclear to me whether a bracket is even necessary for 2280 SSDs.
Just to check if I have interpreted this correctly, you confirm that the 2280 SSD will simply be retained by the screw that held the original 2230 SSD bracket in place, right? so if one wanted to, they could just upgrade the included 2230 SSD to something larger (forgetting about thermal shields etc. for now) by simply removing three screws, removing bracket/2230 SSD, instal the 2280 SSD and retain it with one of the original three screws just removed?
@TekNik5 Sorry for the late reply. Dell Community doesn't email notifications when someone responds and I'm not on here frequently. Yes, a 2280 sized SSD would be able to mount directly with a single screw.
ejn63
12 Elder
•
31849 Posts
•
156277 Points
0
0
Posted December 3rd, 2024 20:11
The service manual is still there -- inside the owner's manual. It does appear there is space for a 2280 SSD, but curiously, Crucial lists only 2230 drives -- the bracket that holds the drive may not permit a 2280 drive to fit.
Whether there's a bracket that from another system that will work is open to question -- the Inspiron 7640 takes 2280 SSDs. Perhaps a bracket from that model will allow a 2280 drive in the lower end 5000 series system.