UNSOLVED

Man_ish

updated

2 months ago

Closed

M

Man_ish

1 Rookie

•

6 Posts

•

2 Points

0

481

April 17th, 2025 18:42

Inspiron 15 3511, hinge problem

Building quality is very bad. I always open very carefully but I dont know how the both hinge came out from the screen panel. Very worst model

(edited)

  • ejn63

    12 Elder

    •

    31862 Posts

    •

    156331 Points

    3

    0

    Posted April 17th, 2025 18:53

    It's built to sell for the price it did in 2021 -- just like every other budget consumer-grade notebook on the market.

    It is not possible to build a robust notebook for the $500 this system sold for.

  • Samsher0

    1 Rookie

    •

    2 Posts

    •

    2 Points

    2

    0

    Posted April 18th, 2025 02:12

    If they cannot give a good product at a low price then they should not give a weak product either. The buyers think that if it is Dell's product then it must be good, how would they know that he has chosen Dell and is using it. 🫡

  • Filben

    1 Rookie

    •

    9 Posts

    •

    2 Points

    2

    0

    Posted April 18th, 2025 09:33

    Seems to be a common problem with some laptops these days with loads of DIY fix videos out there.  I think the manufactures should take note.  If they can't afford to supply robust mechanical components with their laptops they should at least make sure the springs in the hinges are not set so tight.  Some major retailers (UK) who provide laptop repair services won't even entertain hinge repairs.  It doesn't instill confidence in the consumer.

  • Man_ish

    1 Rookie

    •

    6 Posts

    •

    2 Points

    18

    0

    Posted April 19th, 2025 11:23

    Sorry I wrote wrong model no. This is the correct model that has bad quality building, Inspiron 15 3511

    (edited)

    HedgeFundManager

    4 Apprentice

    •

    575 Posts

    •

    1904 Points

    0

    April 18th, 2025 19:30

    Machine is an 11 gen class machine so it is a couple of years old. I have a much older XPS 15 9570 that runs fine.

    Mind you I take care of my machines and keep dust under control etc

    Chino de Oro

    11 Legend

    •

    8563 Posts

    •

    47191 Points

    0

    April 18th, 2025 22:26

    XPS 15 9570 is one of top of the line consumer laptop from Dell.  It was built with good quality materials.

    Inspiron 15 3511 is an economy, budgeted tier model (3000 basic, 5000 mid-range, 7000 high-end).

    They are absolutely not comparable in performance, quality, pricing.

    Man_ish

    1 Rookie

    •

    6 Posts

    •

    2 Points

    1

    April 19th, 2025 03:30

    @HedgeFundManager​ 

    I invested so much money to purchase what do you think I would not take care of my laptop

    I saw many students having this model have hinge problem but why should it be.

    I'm not big gient to invest very heavy money. People even purchase in 30k I did not see any issue with that machine

  • Filben

    1 Rookie

    •

    9 Posts

    •

    2 Points

    3

    0

    Posted April 19th, 2025 12:10

    @ejn63​ In my case the machine was only just out of its warranty period.  That's not acceptable as far as I'm concerned.  The retailer who I purchased from went through the motions with regards to repairs but refunded my repair deposit because they were unable to carry it out.  Eventually I had to repair the laptop myself with some JB weld as seen on a YouTube video and set the hinge springs slightly looser so as not to hit further down the line.  This model comes up time and time again in these repair videos.  Not having a pop at Dell because other brands  are just as guilty.  The quality of all laptop brands seems to have taken a tumble. It doesn't seem much of and ask that a laptop lid hinge mechanism, a major component of a laptop, should stand the test of time.  I didn't throw my laptop around with undue care so from my point of view it's a design flaw.  I do appreciate where you are coming from with regards to premium and budget laptops.  It's a shame because apart from that issue the laptop performs decently.

  • Man_ish

    1 Rookie

    •

    6 Posts

    •

    2 Points

    0

    1

    Posted April 19th, 2025 12:30

    Let me show you image and decide its building quality.

  • HedgeFundManager

    4 Apprentice

    •

    575 Posts

    •

    1904 Points

    4

    0

    Posted April 20th, 2025 00:07

    Those photos show a lot of corrosion on the metal suggesting the cause of the metal failure

  • Filben

    1 Rookie

    •

    9 Posts

    •

    2 Points

    5

    0

    Posted April 23rd, 2025 07:07

    It's the plastic housing where the tiny metal nuts sit they become stressed and break away.  The top picture shows this clearly as the plastic is still attached to the nuts.  For this type of set up the spring hinges in my opinion are set too tight.  They can be loosened by turning the nut on the hinge mechanism.  Obviously, you don't want the laptop lid too loose but set too tight places undue stress on the plastic housing hence why it breaks away from its intended home.  It's only through experience why I understand Man_ish's angst.

    (edited)

  • Henry811

    1 Rookie

    •

    7 Posts

    •

    41 Points

    6

    0

    Posted September 14th, 2026 04:08

    My hinge damage looks exactly like the one in the photo above!

    The three nuts on the mounting plate have pulled loose from the plastic base; the plastic simply isn't strong enough!

    The hinge is far too tight—it doesn't need to be that stiff. Those three screws exert immense force on the plastic base.

    Dell's designers are certainly capable of fundamentally resolving this notorious "hinge issue."