
UNSOLVED
Closed
I give up
I've attempted to post a question several times, but some parameter in this forum keeps flagging my posts are sp@m. So here's my last attempt to circumvent this forum's broken system and ask my question:
Is it possible to install Window 10 32bit on the Inspiron 11 3162/3164? My Inspiron 11 3162 currently has Windows 10 Home 64-bit installed to its 32GB eMMC. I would like to downgrade to Windows 10 Home 32-bit, but have had no success. I'm using an 8GB bootable USB created by Microsoft's Media Creation Tool. I've adjusted Secure Boot / Legacy / UEFI settings in the BIOS. I'm able to reach the setup screen, but unable to format / partition / install to the eMMC.
This conversation is no longer open for comments or replies and is no longer visible to community members.
Responses (5)
Solutions (0)
@robert pwrote:
Hi MSCII,
Thanks for posting. Apologies your posts were quarantined. I've had the moderation team approve them. Seems as though multiple postings of the same message in a short time frame causes the Forum AI to classify them as suspicious. They should be live now.
Thank you. That does explain why my subsequent posts were "flagged as sp@m". Unfortunately, it does not explain why my initial post was rejected.
@robert pwrote:
As for your question: While you may be able to install a Windows 10 32 bit version on your computer, the drivers and files that support other features on your computer would not be available from Dell, and would not be supported. If you were to contact Tech Support for troubleshooting, the OS would have to return to what was installed on the unit when it shipped.
Agreed. This is a deep-budget machine that would not warrant any service from Tech Support. Any out-of-warranty service costs would likely exceed the cost of the machine itself.
I was looking for input from someone with experience installing Windows 10 32-bit on an Inspiron 11 3162 / 3164, or at least has any suggestions concerning its BIOS / Legacy / UEFI / eMMC limitations.
After reading some other community posts, and a lot of trial-and-error, I'm nearly convinced the issue is with the onboard eMMC drive. The motherboard is definitely Legacy-capable, at least to some extend. But it seems the onboard eMMC drive is not. Perhaps another model with the same motherboard but SATA drive would have been able to accept a 32-bit OS install.
@MSCIIwrote:
@ieee488wrote:
Why are you wanting to install Windows 10 32-bit?
Fun and profit.
j/k,
A smoother Windows experience on very limited, non-upgradeable hardware (32GB eMMC, 2GB RAM).
I have a Lenovo 120S with the 32GB eMMC, 2GB RAM).
I did find it odd that Lenovo installed the 64-bit version of Windows 10.
Maybe for the major Windows 10 update, I will try a clean install of Windows 10 32-bit.
Keeping the recovery partition intact is would be pointless since it would a few iterations behind.

Robert P (retired)
6 Operator
•
9396 Posts
677
0
Posted March 20th, 2018 07:00
Hi MSCII,
Thanks for posting. Apologies your posts were quarantined. I've had the moderation team approve them. Seems as though multiple postings of the same message in a short time frame causes the Forum AI to classify them as suspicious. They should be live now.
As for your question: While you may be able to install a Windows 10 32 bit version on your computer, the drivers and files that support other features on your computer would not be available from Dell, and would not be supported. If you were to contact Tech Support for troubleshooting, the OS would have to return to what was installed on the unit when it shipped.
Robert P (retired)