UNSOLVED

bjoy2

updated

8 years ago

Closed

B

bjoy2

2 Posts

0

1887

October 18th, 2018 00:00

Dell P2719HC Monitor Issue with multi stream transport (MST)

I have an Inspiron 5570 running Windows 10 Pro with 2 Dell P2719HC Monitors connected via USBC and daisy chained via displayport. When you turn on multi stream transport (MST) to enable daisy chaining of the monitors the bit depth of the primary monitor connected via USBC cable drops to 6 bit color depth resulting in posterisation/banding. Turn MST off monitor works fine but cant daisy chain.

I keep getting delay tactics from support trying to solve this. Research suggests the issue is with the Intel UHD Graphics 620 display driver, anyone experienced this issue and solved it?

This conversation is no longer open for comments or replies and is no longer visible to community members.

  • 1816

    0

    Posted October 29th, 2018 07:00

    I have color depth issue with Latitude E7470 (Intel HD 520) and Dell U2415. Once I enable DP1.2 in monitor settings I see color banding. I have no resolution for the issue

    Latitude E7470 + 3xU2415 using daisy chain

  • jphughan

    11 Legend

    •

    13985 Posts

    •

    79931 Points

    1786

    0

    Posted October 30th, 2018 22:00

    I have a Latitude 7480 with the same Intel 620 GPU and dual U2717D displays (2560x1440).  I have a USB-C to DisplayPort cable to my first display and then I'm using that display's MST output to connect to the second.  It works flawlessly.  I also have an older XPS 15 9530 that has a much older Intel HD 4600 GPU, where I'm using a Mini-DisplayPort output into the first U2717D, and it handles daisy chaining just fine.  Win10 Pro on both systems.

  • jphughan

    11 Legend

    •

    13985 Posts

    •

    79931 Points

    1785

    0

    Posted October 30th, 2018 22:00

    One other data point.  The P2719HC has come up around here recently because it turns out that it doesn't work at all via USB-C with the XPS 13 9350.  The 9350's USB-C output works fine with other displays, and that display's USB-C input works fine with other sources -- and if you use the XPS 13 9350 with a USB-C to HDMI adapter to connect to the P2719HC's HDMI input, that works fine too.  But for some reason, connecting the XPS 13 9350 to that display's USB-C input is a non-starter.  I only mention this because it's possible there's some strange firmware issue with that display.  Here is the link to one of the threads where this came up.