2nd SSD Installation causing BSOD on Inspiron 15 7591
Hello,
I have a new Dell Inspiron 15 7591 laptop. The laptop has room for two M.2 NVMe PCIe 3x4 drives, one of which has been filled by the SSD that came with the laptop, and an additional space for a 2.5" Sata hard drive therefore giving me 3 drives for storage.
I have recently successfully upgraded the memory and added a Samsung 860 Evo Sata SSD in the laptop.
The problem arises when I try to add a second NVMe SSD (Sabrent Rocket NVMe M.2 PCIe Gen3X4) in the second M.2 NVMe slot as a storage drive only. After installation I boot up the computer, however it immediately goes to the BSOD with the stopcode "Kernal Security Check Failure" and then it restarts and keeps on looping to the BSOD and restarting. I cannot bootup to the Windows home screen and the only option I have is to press F2 on the Dell logo screen before it reaches the BSOD, which takes me to the BIOS Settings menu. I don't know much about the settings here but on the systems information page it does recognise the second NVMe drive I have installed.
Can anyone help me? This is the first time I have done any upgrades on my laptop and having searched the web there doesn't seem to be any cases similar to the one I'm experiencing.
Any help would be much appreciated. If you require further information from me please let me know.
The specs below are for the 7591. Notice that the specs state one of the following configurations are compatible. It does not mention 2 x M.2 NVMe/PCIe drives in the configurations that are compatible.
As for the Kernel Security Check Failure, this page may help.
Your computer supports one of the following configurations:
One 2.5-inch hard-disk drive
One M.2 2230/2280 Solid-State Drive (SSD)
One 2.5-inch hard-drive and one M.2 2230/2280 Solid-State Drive (SSD)
One 2.5-inch hard-drive and one M.2 2230/2280 Intel Optane storage
The primary drive of your computer varies with the storage configuration. For computers with a M.2 drive, the M.2 drive is the primary drive
Table 1. Storage specificationsForm factor Interface type Capacity
One 2.5-inch hard-disk drive
SATA AHCI, up to 6 Gbps
Up to 2 TB
One M.2 2230/2280 solid-state drive
PCIe Gen 3.0 x4 NVMe + SATA3 AHCI, up to 32 Gbps
Up to 512 GB
One M.2 2230/2280 Intel Optane Storage
PCIe Gen 3.0 x4 NVMe, up to 32 Gbps
Up to 512 GB
I am not a Dell employee...I am forum volunteer
Serious work on an E5430 and constantly building and working on an i5-6500 Desktop
Although the specifications say “one of the following configurations”, the specs sheet is not always correct. For example, it says the 2.5 inch hard drive capacity supports up to 2TB. However I have successfully installed a 2.5 inch drive with a capacity of 4TB.
In addition, there are a couple of cases where the same laptop has been successfully installed with an additional SSD drive.
I also wanted to ask, not just JOcean but to the community as a whole, is there a difference between some SSD drives which support Intel Optane Storage and ones that don’t? If so do you know examples of which SSD on the market that support Intel Optane Storage?
I was talking to someone on the support line who seemed to think this maybe the reason for the problem I’m experiencing, but they would not elaborate on what SSDs support Intel Optane Storage.
I’ve been told it may have something to do with the second slot only accepting an SSD with Intel Optane Storage, but as of yet I have no idea what the difference is between SSDs with and without Intel Optane Storage. If you have any knowledge of this any information would be helpful.
If you are planning to purchase this laptop, it maybe best not to purchase an extended warranty as Dell have been extremely unhelpful.
To find out what your 2nd slot will actually work with. Why not move your SSD from the 1st slot to the 2nd slot and see if it boots and works without issues if so you know that the slot has the capability. Should be if that is the case them running two m.2 should work. As far as Optane is concerned I posted a link in an earlier reply as to what Intel Optane is. I don't know but I also don't see that it is a real advantage since its only in a very small 32gb size. If you think this would work for you all you need to do is set up a RAM Disk using part of your Main SSD? Samsung SSD has Rapid mode which is essentially a RAM disk set up very fast speeds for small amounts of data larger transfers of data it doesn't help at all actually impedes the transfer. So anyone that knows the facts do not use this Rapid Mode. To be clear I have no experience with Intel Optane I looked at it and decided its expensive and very small data size. So I just passed M.2 NVME 4 lane is very fast storage and very fast booting and will maintain very fast transfers of large data blocks in the 100GB and larger groups of files.
I also found the reddit post previously, I have tried to contact the user but unfortunately not got a reply yet. Will keep you updated if I get a reply.
Regarding the 2.5 inch SSD, the laptop came with the necessary mounting hardware including a mounting bracket (not very sturdy but did the job) and 4 screws to attach your 2.5 inch ssd to the mounting bracket.
Thank you for your previous email, I have just tried your method of swapping the ssd that came with the laptop from the 1st slot to the 2nd slot. However after opening the laptop up this isn’t possible because the ssd that came with the laptop was a 2230 and the 2nd ssd slot is only for 2280. There is no where on the 2nd ssd slot where I could put the screw down to hold a 2230 in place, it seems the 2nd slot is only for 2280.
The 1st ssd slot can fit both size 2230 and 2280, it seems I will need another ssd with a size of 2280 to try the 2nd slot.
I did try the Sabrent ssd on a ssd enclosure I purchased and it worked fine, therefore it seems Dell support blaming the 3rd party hardware was wrong.
From the information I currently have and what has been tried it seems something is wrong with the 2nd SSD slot on the Dell laptop or there is something in the BIOS I may need to change. If there is anyone with any knowledge of this or they require more information let me know.
I was just looking in the system information in the BIOS menu, on ‘Boot Sequence’ it used to say ‘UEFI: NVMe Toshiba partition 1’ now it says ‘Windows Boot Manager’, does anyone know what the difference is? The computer is still working fine, so not sure what the difference is.
JOcean
11 Legend
•
12621 Posts
•
69453 Points
3645
0
Posted December 23rd, 2019 04:00
The specs below are for the 7591. Notice that the specs state one of the following configurations are compatible. It does not mention 2 x M.2 NVMe/PCIe drives in the configurations that are compatible.
As for the Kernel Security Check Failure, this page may help.
- One 2.5-inch hard-disk drive
- One M.2 2230/2280 Solid-State Drive (SSD)
- One 2.5-inch hard-drive and one M.2 2230/2280 Solid-State Drive (SSD)
- One 2.5-inch hard-drive and one M.2 2230/2280 Intel Optane storage
The primary drive of your computer varies with the storage configuration. For computers with a M.2 drive, the M.2 drive is the primary driveTable 1. Storage specificationsForm factor Interface type Capacity
One 2.5-inch hard-disk drive
SATA AHCI, up to 6 Gbps
Up to 2 TB
One M.2 2230/2280 solid-state drive
PCIe Gen 3.0 x4 NVMe + SATA3 AHCI, up to 32 Gbps
Up to 512 GB
One M.2 2230/2280 Intel Optane Storage
PCIe Gen 3.0 x4 NVMe, up to 32 Gbps
Up to 512 GB
I am not a Dell employee...I am forum volunteer
Serious work on an E5430 and constantly building and working on an i5-6500 Desktop