UNSOLVED

John Doe 10101

updated

8 years ago

0

2951

November 21st, 2018 05:00

Inspiron 3662, monitor flickering

Hi, Ordered Inspiron 3662 Dell from Euro PC.  

Issue came right out the box. The computer runs fine but occasionally the screen will go blank for little to no reason and return to normal. The screen doesn't say "Cable not detected".  

Tried different VGA Cables, tried different monitors, tried supportassist to detect issues, updated drivers, roll back drivers. Happens outside the box. Got a return, computers were tested and reported fine, got a different computer (same model and the issue persists.)  

Please someone advise as I am wanting to return this (if issue cannot be fixed) but seller won't accept it unless I get feedback from Dell.

  • Dell-SreejithR

    6 Operator

    •

    3398 Posts

    2232

    1

    Posted November 21st, 2018 06:00

    Thank you for your message. I apologize for the inconvenience caused. I will be glad to assist you with this.

     

    Do you observe the black screen on the external monitor when output by Miracast or Intel WiDi?

     

    What is the version of BIOS & Windows (Build) installed?

     

    Restart the computer & tap F2 to get into BIOS & stay on this screen for a while & check if the issue persists, this will help us diagnose if there is a hardware or a driver issue.

     

    For my reference, please click on the message tab next to your avatar– click “New Message” & search for my Dell username (Dell-Sreejith R) & send a private message with the service tag, registered name & email address.

     

    Click here to find the service tag -  https://dell.to/2xXUCUW

     

     

  • ArduinoGuy

    20 Posts

    1892

    1

    Posted November 21st, 2018 12:00

    If you can afford the downtime, I'd leave it in the F2 BIOS for a while to see if it occurs there, too. If it happens there, you know you're looking at a hardware problem somewhere in the chain and can rule software out completely. Alternatively, if it stops, you can look at software troubleshooting.

  • RoHe

    12 Elder

    •

    45230 Posts

    •

    172625 Points

    2219

    1

    Posted November 21st, 2018 12:00

    What happens if you use the PC's HDMI port and an HDMI cable, instead of VGA, assuming your monitor has an HDMI input port?

    You might look in Windows Event Viewer to see if any errors are logged around the time of a blink.

  • 2197

    0

    Posted November 22nd, 2018 07:00

     

    Don't really have the resources to test the Widi or Miracast. I used chromecast but nothing happened to the Television.

    BIOS Version 2.8.0 & Windows 10.

    I left it on for an hour in the bios settings. No black screen observed.

     

  • Dell-SreejithR

    6 Operator

    •

    3398 Posts

    2195

    0

    Posted November 22nd, 2018 07:00

    The BIOS screen not going black confirms that is not a hardware issue, this could be caused by the driver.

     

    Please download & save Intel HD graphics driver, BIOS & Intel Chipset Device Software driver to your desktop screen.

     

    Open task manager- click on the startup tab & disable all startup items excluding the anti-virus.

     

    Complete All Windows updates, open device manager – expand display adapter – right click on the graphics driver & click on uninstall (check the box that says delete driver) do not restart the computer.

     

    Install the Chipset driver, Intel HD graphics driver & then the BIOS again (even if you have the latest version) & then restart the computer.

     

    Observe the computer & let me know the outcome.

     

     

  • 1865

    0

    Posted November 22nd, 2018 08:00

    Attempting now.

  • 2191

    0

    Posted November 22nd, 2018 08:00

    I looked around. Found a HDMI monitor & HDMI cable and reported no blank screen. Can only hold onto this screen temporarily though, would like a solution to VGA.

  • RoHe

    12 Elder

    •

    45230 Posts

    •

    172625 Points

    1849

    0

    Posted November 22nd, 2018 11:00

    So it works OK via HDMI with no blinks...

    If updating chipset, video drivers and BIOS doesn't help, you might consider trying an inexpensive HDMI (PC) > VGA (monitor) adapter with your VGA monitor as a work-around.

  • speedstep

    11 Legend

    •

    46969 Posts

    1846

    0

    Posted November 22nd, 2018 12:00

    HDMI OUT to VGA is possible

    VGA OUT TO HDMI is not aka the adapters are not bi directional aka 2 types

    https://www.amazon.com/Adapter-FOINNEX-Converter-Connecting-HDTV-Male/dp/B071SHJ1S3

    https://www.amazon.com/Active-Adapter-Benfei-Converter-Gold-Plated/dp/B01KLKQN9U/

     

     

     

     

  • Dell-SreejithR

    6 Operator

    •

    3398 Posts

    1485

    0

    Posted November 23rd, 2018 06:00

    Could you please share a video of the issue? The screen not going blank in BIOS rules out the hardware issue.

    Please start the computer in safe mode by following this link https://dell.to/2tPi85q & check if the issue persists here.