I received the following 2 email alerts from our SAN the other day:
Time Stamp 07/14/13 06:18:24 Event Number 940 Severity Error Host MSVOTTSAN1_SPA Storage Array APM00081700058 SPA Device Enclosure 0 SPS A Description Fault reported by SPS Replace the SPS
Time Stamp 07/14/13 06:18:27 Event Number 940 Severity Error Host MSVOTTSAN1_SPB Storage Array APM00081700058 SPB Device Enclosure 0 SPS A Description Fault reported by SPS. Replace the SPS
I logged into Navisphere and checked the Alerts but there weren't any present so I checked the physical boxes for any warning lights but everything looks green.
Is there somewhere else I can check to find more about these alerts? I've determined that they are referring to the Standby Power Supplies (Battery backups) but from what I can tell, they are operating normally.
(Support has lapsed on these units so can't call in)
That error refers to a battery test. That test happens once a week & you will get those errors. You can’t disable the test as it is written into the Flare( firmware) of the san. You can change the date & time so that it happens at a time that you want.
Please let us know if you have any other questions.
Thanks for the additional info. No we didn't change the templates. Only thing was we recently provisioned another LUN which then had a disk failure and I'm waiting on a replacement. Other than that no.
Not sure why you are just now seeing the message. Did you make any changes to your AEH( Automated Home Email) template? If so then that might have triggered it. If you would like you can pull some SPcollects from both SP’s I can review them to make sure it was just a test & not an failed SPS. I will create a dropbox that you can upload the logs to & send you an email with a link to upload the files.
Please let us know if you have any other questions.
If any of the SPS units have the amber colored light on in the back, you should replace them. There's an online tutorial on how to replace an SPS here:
DELL-Sam L
Community Manager
•
8147 Posts
•
34706 Points
8277
0
Posted July 17th, 2013 09:00
Hello MarcLaflamme,
That error refers to a battery test. That test happens once a week & you will get those errors. You can’t disable the test as it is written into the Flare( firmware) of the san. You can change the date & time so that it happens at a time that you want.
Please let us know if you have any other questions.