Tower Plus EBT2250, boot problems after a BIOS 1.20.0 update
I did a Windows 11 update yesterday and noticed when it rebooted, it went right into the Dell Bios update (I DID NOT UPDATE). Well, after the flash finished, it won't even boot into repair mode. I've tried for 12 hours, numerous ways.
Finally I got a flash drive and tried to do the BIOS and each time it says it can't downgrade. I thought I went into configuration and checked the box to allow this but it seems not to make any difference. Plus, it shows in the logs that 1.20.0 flashed successfully. But, I can't even find any newer BIOS other than 1.19.0 so I'm not sure how I got the 1.20.0 version?
I get a continuous loop and it tries to go into repair mode but reboots over and over. I tried a USB with Windows 11 and I can't get into the repair screen. I'm just blocked someway. I really hate to start over but thankfully, this is a back up computer for work and my info is on my Work computer as well as my NAS. However, I really would like to get the boot working.
Be sure these BIOS options are the same as before the incident:
UEFI-Mode
AHCI or RAID
AND THEN,
... be sure your Boot Priority #1 is still "Windows Boot Manager" on your main Windows-SSD.
Dell Rockstar
Microsoft Windows and Apple iOS Developer (Retired) - Like many of you, I can appreciate a good game-engine. - I answer questions here, but I'm not a Dell employee. - Consider giving posts you like a "thumbs-up" - Posting models-numbers and software versions speeds trouble-shooting. - Click "Mark as Accepted Answer" on any post that answers your question best.
- This BIOS contains the new 2023 Secure Boot Certificates. - Do not power off the system until the process of updating the BIOS is completed. - Once the BIOS is upgraded, you cannot downgrade the BIOS to versions earlier than 1.12.0. BIOS downgrades are restricted when there are security updates and important fixes with earlier versions that impact the functionality of the system.
Contact Dell GHN (Get Help Now) chat technical support Monday through Friday. Click the blue "Get Help Now" on the right to start a private live chat session. Share the private Service Tag with them so that they can verify the ownership and warranty. Also share the link to this Forum thread.
Did you do the following?
* Disconnect the power cable from the Tower Plus EBT2250 rear power port
* Wait 2 minutes
* Press and hold the front power button for 8 seconds
* Reconnect the power cable to the Tower Plus EBT2250 rear power port
* Power on
The Tower Plus EBT2250 Drivers & Downloads page shows BIOS 1.20.0 released on September 2, 2026. Microsoft would have received pre-release notification of this release which is why Windows Update found it.
BIOS 1.20.0 Important Information states = Once the BIOS is upgraded, you cannot downgrade the BIOS to versions earlier than 1.12.0. So in theory you should be able to back flash to BIOS 1.19.0 ?
I thank everyone for their time and help. I'm not sure what I did but I pretty much did the same things a few more times and it just booted into Windows. I'm not sure if my problem is fixed but now that I do have 1.20.0 (thanks to Chris), I know it's available. I put in my ST and that version DID NOT pop up so I glad I have it.
I hope I'm good for now. And, I learned something else too!
I seem to have hit a DIFFERENT problem on my wife's EBT2250?
I can't even INSTALL IT?
I thought maybe a corrupted file? So I got it down again, same thing?
PC is running Win11 Home, 25H2 (OS Build 26200.9168)
I Googled "error unable to find os protocol access interface" and it appears this is a common Dell PC problem?
Google AI says it is this:
=============
The "Unable to find OS Protocol Access Interface" error during a Dell BIOS update is usually caused by missing, corrupted, or outdated ACPI and system management drivers in Windows.
=============
I even ran the update as Administrator as one link had that suggestion. Still fails?
So I ran Support Assist and had it check. It found 2, but NOT the BIOS?
So I went ON-LINE and checked what files are available for the PC?
So I go back to the web page and let IT search for Updates (which I think kicks off Support Assist) and it finds this:
Confused as they all seem to find different things?
So I let it installed the Chipset package, get this:
I’d avoid reinstalling Windows for now, especially since you have important data backed up elsewhere.
The first thing I’d try to establish is whether 1.20.0 is actually the BIOS version currently installed and whether Dell has made that particular BIOS available for the Tower Plus EBT2250. If the machine is showing 1.20.0 in the BIOS setup and the flash log says the update completed successfully, repeatedly trying to downgrade to 1.19.0 may not help if the firmware is enforcing a downgrade block.
Since Windows is getting as far as attempting Automatic Repair and then rebooting, I’d also try to separate a Windows boot problem from a firmware/boot-configuration problem. From the Windows 11 USB, see if you can get to the recovery environment and try Startup Repair first. If that isn't available, Command Prompt from the recovery environment can be useful for checking whether the Windows installation is still being detected.
I’d also check the BIOS settings after the firmware update, particularly the boot mode and storage/RAID settings. A BIOS update can sometimes reset or change a setting that Windows was relying on, which can result in a repair loop even though the Windows installation itself is still intact.
Before making any major changes, I'd take photos of the current BIOS settings and avoid changing multiple things at once. Since your data is already backed up, that gives you some room to troubleshoot without immediately resorting to a clean installation.
The unusual part here is the 1.20.0 version when you're only finding 1.19.0 publicly. I'd verify the exact Dell service tag/model and the BIOS version shown in the BIOS screen before attempting another firmware flash.
At this point, I'm not so sure I want to put down that BIOS, especially with the OP's post?
Agreed.
I think I would hold-off for now ... sounds like computer is already fairly current (and working properly), so no rush or immediate need to update BIOS.
You can always do it later after the smoke-clears.
(edited)
Dell Rockstar
Microsoft Windows and Apple iOS Developer (Retired) - Like many of you, I can appreciate a good game-engine. - I answer questions here, but I'm not a Dell employee. - Consider giving posts you like a "thumbs-up" - Posting models-numbers and software versions speeds trouble-shooting. - Click "Mark as Accepted Answer" on any post that answers your question best.
Just FYI, I must have gotten lucky as after many, many attempts to get a proper reboot, it did (over a day and a half of rebooting circles) and I am definitely on 1.20.0 and everything has been working fine since.
Tesla1856
10 Wizard
•
18086 Posts
•
71947 Points
13
0
Posted September 2nd, 2026 03:11
Be sure these BIOS options are the same as before the incident:
UEFI-Mode
AHCI or RAID
AND THEN,
... be sure your Boot Priority #1 is still "Windows Boot Manager" on your main Windows-SSD.
Dell Rockstar
Microsoft Windows and Apple iOS Developer (Retired)
- Like many of you, I can appreciate a good game-engine.
- I answer questions here, but I'm not a Dell employee.
- Consider giving posts you like a "thumbs-up"
- Posting models-numbers and software versions speeds trouble-shooting.
- Click "Mark as Accepted Answer" on any post that answers your question best.