I'm about to purchase a stock QCM1250 but the first thing out of the box, I have to add a Wifi card, preferably with external antennae. There's a lovely description on how to install two SMA cables in the owners' manual but where do you get the SMA connector bracket described and shown there? Is there a customer only parts link ??
I read through both manuals but bought the Micro for home. Iʻve found all the parts I need except for that silly bracket. Iʻll probably just mill or print one.
That's not a bad idea. Sometimes Dell makes certain parts only available at the time of ordering. So if the QCM1250 would've been ordered with the wifi card, then the bracket would be there. I imagine the 1250 is too new to be able to buy parts from sites like eBay.
I'm about to purchase a stock QCM1250 but the first thing out of the box, I have to add a Wifi card, preferably with external antennae. There's a lovely description on how to install two SMA cables in the owners' manual but where do you get the SMA connector bracket described and shown there? Is there a customer only parts link ??
When you buy the PC you can do the Configuration choice and select the Adapter. Either the internal or external antennae.
I got the larger EBT2250 and it came with the BE200 and no antennae choice.
Since I have the same card in my XPS8940 using the internal 2x2 antennae I wasn't concerned.
If you should select no wireless adapter you might not get the internal antennae either...
I weighed several custom configurations but decided to just buy a stock package from Dell to upgrade later. I can easily make a mounting plate for the two antennae ( the rest is just commodity parts ) but the difficulty in acquiring a part that the manufacturer both shows and describes in the owner's manual as part of their CRU field procedure is a curiosity to me and a bit disconcerting.
I found most of what I needed on Amazon. Two 8” SMA / IPX4 cables and the BE200 card with a PCI bracket with two antenna. ( probably from Aliexpress ) I decided to use the DELL puck antenna and found one for $9 on Ebay. The unobtainium bracket Iʻll just print since I no longer have an SMA D punch. Ironically, I saw a Youtube showing an older Optiplex with chassis knockouts for the two holes . No bracket needed.
bradthetechnut
9 Technologist
•
9712 Posts
•
40924 Points
0
1
Posted August 26th, 2025 03:30
Did you get the micro or slim desktop?