I am using OME to update my servers' firmware, BIOS, LifeCycle Controller and using dell repository. I had a problem with some of my R720 boxes. Have removed them from OME than I have reset DRAC's and run hardware inventory on the boxes via DRAC. I have then run Discovery and Inventory in OME. It has found all 8 servers but only one of them has been inventoried and is ready to receive firmware updates. The other 7 are listed as Non-Inventoried systems and stay there regardless of how many times I will run Inventory.
I am not using WSMan I am using SNMP Traps for discovery. Also the DRAC version is 1.51.51
Those servers were inventoried and received one round of updates during our previous cycle about same time last year. Now they were on the list of non-compliant systems but once clicked did not show any updates, so I have decided to delete them from inventory reset the dracs and than I run discovery and inventory in the OME to re add them. 1 of those servers was added correctly 7 others are showing us non-inventoried systems in OME.
I have installed the hotfix a couple of weeks ago and some of 12Gen hardware is working fine with my current settings but some of them are not behaving as expected. I did not have OMSA installed on any of my servers and currently am monitoring 74 11th and 12th Gen dell servers. after installing the OME 1.2.1 patch I have all of the 11th Gen servers with DRAC6 updating perfectly and also have 2 types of behavior from the 12th Gen servers with DRAC7
1. They update fine
2. Show on non-compliant hardware but once ticked no updates show as available and after removed from OME and re-added will not inventory.
So if some of them are updating using SNMP the others also should be able to.
It looks like you want to do updates using OME. If you are using SNMP, you will need OMSA installed on the target machines. If you don't go that way, you will need WS-MAN for the iDracs and will have to install the hotfix noted below.
I have managed to resolve all the issuer with R620 models. A DRAC reset and a run of System inventory and then inventory and status refresh in OME did the trick.
No did not apply that Hotfix yet. I can't connect on the number you have posted it's just giving me the invalid number prompt. Would you be able to provide a number to call to in UK.
DELL-Rob C
4 Apprentice
•
2843 Posts
967
0
Posted February 14th, 2014 07:00
Hi and thanks for the question.
So can you confirm you are using WSMan as the protocol in discovery and inventory?
And can you confirm the device is getting classified correctly under the RAC or Server group?
What iDrac version do these R720 servers have?
I just posted this info yesterday:
http://en.community.dell.com/techcenter/systems-management/f/4494/t/19544885.aspx
Thanks,
Rob