Is there a way to see who made zoning changes from the Cisco switch logs?
We need to track down who made some zoning changes in Fabric Manager (not necessarily an activation). There doesn't seem to be a simple, obvious method so obviously we have to look through some logs but which ones? I don't know if this makes a difference but we use enhanced zoning.
if you run "show logging logfile", you will see entries similar to this:
snmpd: SNMPD_SYSLOG_CONFIG_I: Configuration update from 3188_192.168.1.11 user/community name : CLI/SNMP v3:admin
this is me logged in as admin and making changes to the zoneset. I can't seem to find a way to dispaly what changes were made but if your admins have unique accunts and the time is set right on the switch ...you will at least know who was logged-in.
dynamox
11 Legend
•
20419 Posts
•
87439 Points
394
0
Posted March 7th, 2010 07:00
if you run "show logging logfile", you will see entries similar to this:
snmpd: SNMPD_SYSLOG_CONFIG_I: Configuration update from 3188_192.168.1.11 user/community name : CLI/SNMP v3:admin
this is me logged in as admin and making changes to the zoneset. I can't seem to find a way to dispaly what changes were made but if your admins have unique accunts and the time is set right on the switch ...you will at least know who was logged-in.