UNSOLVED

pnagpal

updated

19 years ago

P

pnagpal

1 Rookie

•

24 Posts

0

2451

September 11th, 2007 03:00

unable to acquire lock(s), try later

I am trying to create folders on my NAS box using the below command and getting the error"unable to acquire lock(s), try later ".

nas_quotas -on -tree -fs kolfs01 -path /IT_HOME/123456

Please suggest....
  • dynamox

    11 Legend

    •

    20419 Posts

    •

    87439 Points

    842

    0

    Posted September 11th, 2007 03:00

    i get that some times as well ..i retry in a few minutes and typically it works ok.
  • BillStein-Dell

    Moderator

    •

    285 Posts

    842

    0

    Posted September 11th, 2007 07:00

    If you wait for about 10-15 minutes and you still are getting that message, try rebooting the Control Station. If, after it comes up, you are still getting the message, please open a Service Request with EMC Technical Support. In that case, you likely have an orphaned lock. However, you might not; there may be a process that is hung which persists (or restarts) after reboot. I'd rather have the source of the orphaned lock investigated rather than just having you delete it.
  • Rainer_EMC

    6 Operator

    •

    8645 Posts

    842

    0

    Posted September 11th, 2007 08:00

    most likely the nasdb_backup has temp. locked the config files. This job runs by default every hour at 1 minute past the full hours. just wait a couple of minutes
  • amol2

    15 Posts

    842

    0

    Posted September 11th, 2007 13:00

    I had same problem once. try after 2-3 min or reboot your control station.