M1000e with M610 Blade. iDRAC6 issues with upgrading firmware to 3.50 (Build 4)
- "The uploaded image has failed verification" Error
I have blade that is an M610. its current iDRAC6 Firmware version is 3.30 (Build 17), its BIOS version is 6.0.7. I am trying to upgrade the iDRAC firmware upto version 3.50 (Build 4). I am upradging through the CMC on the M1000e chassis. I choose the slot the Blade is in and then Launch the IDRAC GUI. I choose update firmware and select the firming.imc file that I have successfully used on other M610 Blades. After about 30 seconds it comes back with the following error.
I ran into the same problem (with a refurb M610, iDRAC firmware was 2.20).
I tried to upgrade the iDRAC6 firmware to 3.60 using the iDRAC6 web interface and it was a no go.
I tried several browsers (chrome and firefox) and same issue each time. I tried to upgrade to firmware 2.31 (as specified in the release note) instead of 3.60 and same issue each time.
I eventually managed to upgrade the iDRAC6 firmware by doing the upgrade from the M1000e web interface and not from the iDRAC6 web interface.
I actually managed to find a solution that worked for me updating all drives and firmware.
First I loaded the Linux update iso downloaded from repository manager, that updates the lifecycle manager and fails pretty much everything else.
Once the lifecycle service is updated, I booted into the lifecycle UEFI manager and chose upgrade from the menu, using the SUU windows repository from the repository manager, this updated everything else, including BIOS and iDRAC.
Klug_fr
11 Posts
3296
2
Posted June 12th, 2014 06:00
I ran into the same problem (with a refurb M610, iDRAC firmware was 2.20).
I tried to upgrade the iDRAC6 firmware to 3.60 using the iDRAC6 web interface and it was a no go.
I tried several browsers (chrome and firefox) and same issue each time.
I tried to upgrade to firmware 2.31 (as specified in the release note) instead of 3.60 and same issue each time.
I eventually managed to upgrade the iDRAC6 firmware by doing the upgrade from the M1000e web interface and not from the iDRAC6 web interface.
It worked first time (using Chrome).