Alienware 13 R3 does not turn on after crashing. Earlier in the day I rolled
back BIOS.
Good morning,
Earlier yesterday I had used the DELL USB method to roll back the BIOS from 1.10.0 to 1.9.0 as the CPU constantly was throttling, hitting 100C without an undervolt.
The BIOS rollback went without a hitch, and there was at least one restart done by me during the day and the computer could start without any problems.
It is my son's computer and he was playing games for a good part of the day - low graphics games like Roblox and Minecraft. End of the day he pulled up a more intensive game Raft, that in the past would overheat the computer (until I had to underclock the GPU slightly to make it stable again) - and it crashed a few minutes into it.
Thinking it was the normal crashes we had before, I tried to turn it on, and the fans try to spin up a few times for a half second, then the keyboard lights up and we get the power button giving the two red, pause, one blue LED which I understand to be a CPU problem.
Question 1: What to do now? I have tried holding the power button for a minute, unplugging the battery and the CMOS, taking out half the RAM, all the same effect. Tried to use the same recovery BIOS USB but the same effect.
Question 2: Could the BIOS roll back have anything to do with it? The computer did restart well after the roll back, but it seems awefully coincidental. Weird to have it crash inside of Windows though no?
Hi @ekfc thank you for sharing update complete with Disk Management image of the 13 R3 OS(C:) drive.
The Disk Management image says: this drive has the OS(C:) partition and its hidden EFI and Recovery Partitions. When this OS(C:) drive is installed in the 13 R3, BIOS has access to its on-board EFI and Recovery Partitions. At 13 R3 Power-on, BIOS instructs POST to find and test the installed hardware. BIOS function is working as intended.
It seems that the system board's (motherboard) CPU has failed. Please click on 13 R3 Motherboards vendor's database and open the link to the motherboard installed on your 13 R3. Click on the image of the motherboard, to see that the CPU and GPU are soldered onto the board, and are not user replaceable parts.
If your 13 R3 has a valid Dell Warranty, please raise a fault ticket so that Dell can arrange for installation of a different system board. If there is no Dell warranty, it is now appropriate to consider if purchase of a new OEM system board with one year warranty and its installation, is your solution.
Please share an update on progress, so that other users derive benefit from your experience. Thank you.
[This user does not work for Dell and volunteers their free time. Please remember to say thank you by clicking on my thumb up icon.]
Hi @ekfc welcome to this user to user discussion forum. This is not Dell Support.
Your 13 R3 POST is working and Diagnostics Light pattern 2,1 = CPU Failure. If you power on the 13 R3 and hold down the F12 key, does the Boot menu open so that (ePSA) Diagnostics tests can be undertaken? When Diagnostics window opens, click on bottom RH corner to enter ePSA Diagnostic hardware tests, in new window look on LH side for CPU icon and run test on CPU. You can also run other discrete tests or test all of the hardware.
Please click on Kudos to say thank you for response from another user. Please share an update on progress, so that other users derive benefit from your experience. Thank you.
[This user does not work for Dell and volunteers their free time. Please remember to say thank you by clicking on my thumb up icon.]
Hi @ekfc thank you for sharing update. A poor BIOS downgrade may not allow POST to find and test all the system hardware. The BIOS instructions, to download and check file integrity before installation is essential. It is possible that POST diagnostics may be giving a false positive of hardware failure.
Try no Post Troubleshooting (see video) and try BIOS Recovery Tool, press key combination CTRL + ESC.
[This user does not work for Dell and volunteers their free time. Please remember to say thank you by clicking on my thumb up icon.]
Thanks for trying to help. No new games were installed, the computer just crashed and then it didn't restart. I do have an external USB key with the bios recovery (which I had used to roll back the bios earlier) but I can't get into that recovery environment now.
I tried the suggestions in the video with no luck. I have a USB recovery BIOS key made as per those instructions as well, but even while pushing CTRL ESC and power on, I get the initial fan spin ups and then the error code.
Hi @ekfc BIOS gets its information from a hidden partition on the OS(C:) drive, which may have been somehow corrupted by installing a different game. Was the original OS(C:) drive cloned to a larger drive capacity and does reinstalling the original OS(C:) drive reinstate the BIOS function so that the system boots? If there is another Dell computer available, please create a clone of its OS(C:) drive and see if this drive will get the 13 R3 to boot.
[This user does not work for Dell and volunteers their free time. Please remember to say thank you by clicking on my thumb up icon.]
Thank you for the clarification that "End of the day he pulled up a more intensive game Raft" = started to play the Raft game that was already installed on the OS(C:) drive.
As part of your Disaster Recovery Plan is there a copy of the OS(C:) drive in the cloud, etc.?
[This user does not work for Dell and volunteers their free time. Please remember to say thank you by clicking on my thumb up icon.]
The C drive is in another computer now, functioning. However the DELL recovery partition is not on there, as a few months back I had done a clean install of windows, after formatting the drive.
I did find one page for an external BIOS recovery USB that said that in addition to the writehdr command, writerom was needed. Not sure if that might help, but I am going to try it.
Hi @ekfc thank you for sharing update and that the hidden recovery partition is missing.
Please install SupportAssist on your 13 R3 OS(C:), drive which is now in a different system. SupportAssist should create the hidden ePSA recovery partition, so that when this OS(C:) drive is installed in the 13 R3, F12 ePSA Diagnostics will try and get the 13 R3 to boot.
[This user does not work for Dell and volunteers their free time. Please remember to say thank you by clicking on my thumb up icon.]
crimsom
9 Technologist
•
6114 Posts
1656
1
Posted March 28th, 2021 08:00
Hi @ekfc thank you for sharing update complete with Disk Management image of the 13 R3 OS(C:) drive.
The Disk Management image says: this drive has the OS(C:) partition and its hidden EFI and Recovery Partitions. When this OS(C:) drive is installed in the 13 R3, BIOS has access to its on-board EFI and Recovery Partitions. At 13 R3 Power-on, BIOS instructs POST to find and test the installed hardware. BIOS function is working as intended.
It seems that the system board's (motherboard) CPU has failed. Please click on 13 R3 Motherboards vendor's database and open the link to the motherboard installed on your 13 R3. Click on the image of the motherboard, to see that the CPU and GPU are soldered onto the board, and are not user replaceable parts.
If your 13 R3 has a valid Dell Warranty, please raise a fault ticket so that Dell can arrange for installation of a different system board. If there is no Dell warranty, it is now appropriate to consider if purchase of a new OEM system board with one year warranty and its installation, is your solution.
Please share an update on progress, so that other users derive benefit from your experience. Thank you.
[This user does not work for Dell and volunteers their free time. Please remember to say thank you by clicking on my thumb up icon.]