UNSOLVED

FLM91

updated

1 year ago

F

FLM91

1 Rookie

•

2 Posts

1

2680

April 1st, 2024 22:39

AW3225QF, three, not working on GeForce RTX 4090 Gaming

Spent an hour with Dell Support. 

Cannot get more than two of the three Alienware AW3225QF monitors I purchased for a triple screen setup to work at the same time, no matter which ports I use (HDMI/DP or any combination). One screen is always blank, and cannot be selected in windows or via the nvidia software. Using an NVIDIA 4090.

DSC seems to be the issue from what I can see. Without an option to disable it as a setting on each monitor, it's impossible to run three monitors out of the box given how DSC forces the card to then behave.

Dell support just told me that this monitor is incompatible with NVIDIA graphics cards, unless I bought the graphics card through Dell. Not very helpful. Reaching out to the community to see if anyone has a fix for getting a triple setup to work with NVIDIA 4090.

(edited)

  • ProfessorW00d

    6 Operator

    •

    2373 Posts

    •

    10247 Points

    1

    0

    Posted April 2nd, 2024 01:35

    All RTX 4090 graphics cards are nVidia . . . so assume you have RTX 4090 Founders Edition. Try using Windows Display settings and lower the frequency of your monitor(s) until you get all 3 working with DP connection.

  • FLM91

    1 Rookie

    •

    2 Posts

    0

    0

    Posted April 2nd, 2024 11:55

    Its a GeForce RTX™ 4090 GAMING X SLIM 24G. Have tried very low resolutions and refresh rates for all three, does not make any difference. Card has two HDMI and 2 DP connections. Can try any combination, and using cables supplied with the monitors, same result. Only two monitors work out of the three connected.

    There are four internal GPU heads in the 4090. DSC forced on means two are used for each monitor for the total of four heads, so it is a hard two-monitor limit unless DSC can be turned off, which it cannot for these monitors. 

    Dell support staff (spoke to two different people) adamant the monitor is not compatible with NVIDIA cards lol.

  • ProfessorW00d

    6 Operator

    •

    2373 Posts

    •

    10247 Points

    1

    0

    Posted April 2nd, 2024 13:11

    @FLM91​   OK that looks like an MSI graphics card. Your call that DSC is the problem seems spot on. I have seen this is also a problem with Samsung monitors.

  • Vanadiel

    8 Professor

    •

    7094 Posts

    •

    29695 Points

    0

    0

    Posted April 2nd, 2024 15:33

    This is a common issue with high HD refresh monitors. They need DSC on in order to provide the high refresh rate due to the DP and/or HDMI limits imposed.

    That is why they will use often use more than 1 internal head., in effect limiting your maximum monitor support to 2.

    There's nothing much you can do, because turning off DSC will result in having to run them at a much lower refresh rate in order to stay within the bandwidth limitations of the connection.

    It's not incompatible with Nvidia cards. 

    There's 1 thing you can try:  when using HDMI 2.1 you are able to use it without DSC by switching it to 'Console Mode' via the OSD and setting it to 'Legacy device'. This does restrict it to 120hz but turns DSC off.

  • wilson.1649

    1 Rookie

    •

    5 Posts

    0

    0

    Posted April 9th, 2024 11:38

    I also have this exact same issue trying to run two AW3225QF's and one non oled monitor. I can only get two to work at a time because of DSC.

    Dell, is there a plan to add an option to disable DSC on the AW3225QF? We are all mostly fine with running it at a lower refresh rate with DSC disabled.

    thank you

  • Corretje

    1 Rookie

    •

    9 Posts

    1

    0

    Posted April 26th, 2024 16:54

    Any news on this yet?

    Seems like a great monitor for my race setup, if it works ...

  • Biffen99

    1 Rookie

    •

    6 Posts

    1

    2

    Posted April 29th, 2024 09:04

    3 works for me at 120hz asus rtx4090 all dp

    But cant use Nvidia Surround 

  • OneCent525

    1 Rookie

    •

    6 Posts

    1

    0

    Posted May 7th, 2024 00:04

    how did you get the three AW3225QF to work with the Nvidia card? I tried a lot of settings but non of them are working.

    How do you get in monitor console mode?

  • Vanadiel

    8 Professor

    •

    7094 Posts

    •

    29695 Points

    0

    0

    Posted May 7th, 2024 01:14

    @OneCent525​ Need to lower the refresh rate so the total internal bandwidth is enough to drive a triple setup and you need to disable DSC.

    However, I don't think there's a DSC toggle on/off for this monitor.

    Apparently switching to console mode forces it to 120 Hz and turns of DSC, but your mileage may vary.

  • Biffen99

    1 Rookie

    •

    6 Posts

    1

    0

    Posted May 9th, 2024 06:23

    Lower all screens to 120hz works for me