UNSOLVED

Sherlock_MD

updated

7 months ago

S

Sherlock_MD

1 Rookie

•

2 Posts

•

2 Points

0

292

April 23rd, 2026 20:15

AW3225QF + Sonos Beam Gen 2 eARC issue: can't hear sound

I have an issue with Dell AW3225QF monitor connected via HDMI eARC with a Sonos Beam Gen 2. My setup is:
  • Monitor: Alienware AW3225QF

  • Soundbar: Sonos Beam Gen 2

  • PC connection to monitor: HDMI 2

  • Monitor to soundbar: HDMI 1 eARC

  • OS: Windows 11

  • Dolby app: Dolby Access

  • Monitor firmware: M2B109

  • HDMI cable: official SONOS cable (should be 2.1)

I've already tried restarting PC and monitor, replugging HDMI and turning off/on HDMI CEC, but still nothing.

What should I do?

  • DELL-ChrisM2

    Community Manager

    •

    1992 Posts

    •

    9997 Points

    0

    0

    Posted April 23rd, 2026 20:25

    Contact Dell GHN (Get Help Now) chat technical support Monday through Friday. Click the blue "Get Help Now" on the right to start a private live chat session. Share the private Service Tag with them so that they can verify the ownership and warranty status. This will also generate a unique Technical Support case for your unique Service Tag.

    * Download and install the AW3225QF firmware M2B110
    * When finished installing the firmware, turn the AW3225QF off
    * Turn the AW3225QF on
    * Go into the Menu--> Others
    * Run Factory Reset
    * When done =
    - Turn DDC/CI On
    - Turn HDMI CEC On
    * Exit the Menu and restest

     

    #IWork4Dell

  • Sherlock_MD

    1 Rookie

    •

    2 Posts

    •

    2 Points

    0

    0

    Posted April 24th, 2026 04:44

    Thanks for your reply.

    I've tried everything you told me but still doesn't work. I updated the firmware, then turned off and on my monitor, did factory reset, turned HDMI CEC on. Restarted PC. But still doesn't work.

    In particular:

    1. Every time I restart my PC, it goes immediately to HDMI 1 where my sonos bar is connected. So my display shows a Sonos animation, and I have to switch back to HDMI 2. This is very bothering.

    2. Once my PC is operating, still no sound coming out of the soundbar. However it is recognized in the audio setting (output device: AW3225QF AMD High Definition Audio Device): I've tried to test it with every possible setting (Dolby Atmos for Home Theater, 24 bit 48.000 Hz, 24 bit 44.100 Hz, 16 bit 48.000 Hz, 16 bit 44.1000 Hz, 16 bit 32.000 Hz), but can't hear nothing...

    3. The bar has a green flashing light, nothing strange..

    I've also tried to unplug the bar and reconnect while pressing the infinite bottom (the one to couple devices), still nothing.

    I don't know what to do anymore. Don't know if I should buy a DP cable, maybe using a different connection could help.

  • DELL-ChrisM2

    Community Manager

    •

    1992 Posts

    •

    9997 Points

    0

    0

    Posted April 25th, 2026 12:54

    Perhaps read through this Sonos Beam (Gen 2) User's Guide to see if it helps.

    Every time I restart my PC, it goes immediately to HDMI 1 where my sonos bar is connected. So my display shows a Sonos animation, and I have to switch back to HDMI 2. This is very bothering.


    * Open the AW3225QF Menu OSD --> Input Source
    * The check should be on HDMI 2
    - Auto Select = Off
    - Options for DP/HDMI = Off
    * Exit the Menu OSD and retest to see if same restart issue happens

     

    #IWork4Dell