UNSOLVED

andiabrudan

updated

2 years ago

A

andiabrudan

1 Rookie

•

1 Message

1

1877

February 24th, 2024 02:12

AW3225QF, Fast Wakeup not working?

Hi all!

I've just received my AW3225QF monitor today. I was rocking the AW3423DW before.

After tinkering with the new monitor a bit, I've discovered the fast wakeup doesn't work. When I press the power button on AW3225QF, the monitor completely turns off and even disconnects from the PC (Windows plays the device disconnected sound). The problem with that is the second monitor now becomes primary, and some applications can break until a restart.

I have enabled the feature in "Personalize > Fast Wakeup", but I don't see any difference between on and off.

I've also updated to the M2B102 firmware, but the behaviour is still the same.

On the AW3423DW, pressing the power button would just put the monitor in some sleep mode and kept it connected to the PC. That was the case even through pixel refresh cycles; I've never had it disconnect entirely from the PC like the new one does. In fact, AW3423DW doesn't even have a "Fast Wakeup" option in the menu. It does that by default.

Is there anything else I can try? I'm pretty conscientious about my monitor's health, and I like to turn it off if I know I'll be away for a few minutes, but the time to turn it back on has gone up significantly because of this issue. It was ~3s on the old one, and I'd say it's ~10s on AW3225QF.

(edited)

  • RoyaleFury

    1 Rookie

    •

    1 Message

    1

    0

    Posted April 26th, 2024 06:43

    As soon as I got mine yesterday and set it up my pc won’t go into sleep mode no matter what I have to turn off pc and screen otherwise both stay on not ideal 

  • PumpDaddyKane

    1 Rookie

    •

    1 Message

    1

    0

    Posted April 26th, 2024 13:20

    I am having the same issue. This has been killing me for the last 3 weeks. I've reinstalled windows and it will work for a few days, them bam won't sleep, or turn screen off after in activity. I plugged another monitor in and it works just fine. This seems to be a display driver issue. This needs to be fixed because of the inherent nature of OLED. The monitor needs to sleep after inactivity to run pixel cleaning too. We need some assistance

     

  • Vanadiel

    8 Professor

    •

    7094 Posts

    •

    29695 Points

    1

    0

    Posted April 26th, 2024 13:22

    Fast wakeup is not a sleep or standby mode. Although the manual has very sparse information on it, it's a mode to speed up recovery time from standby mode. That's basically to speed up the monitor returning back to normal mode after you press a key or wiggle your mouse while it was in standby mode.

    A blinking white light indicates the monitor is in standby mode, solid blue indicates it's turned on and functioning normally.

    The time it takes for a monitor to switch into standby mode due to inactivity is a windows setting, I have my DWF set to go into standby mode after 3 minutes.

  • Kryptonite01

    1 Rookie

    •

    3 Posts

    •

    2 Points

    0

    1

    Posted December 16th, 2024 23:15

    @PumpDaddyKane​ What did you figure out for a resolution? I'm having the same issue and Dell is doing nothing to support. Worst customer service experience. Sad that the community has to help and not their technical team.