UNSOLVED

zhoupc

updated

2 years ago

Z

zhoupc

1 Rookie

•

4 Posts

0

436

April 25th, 2024 16:21

AW2725DF triple monitor setup only have two active at the same time

I have three AW2725DF monitors connected to RTX3090 via DP1.4 cables. Windows 11 only allows to select two monitors active at the sametime. Whenever I chose the 3rd monitor in nVidia control panel the 2nd monitor will automatically uncheck by itself. After some Googling I believe it's due to DSC feature that we can't toggle off in the monitor. Is this correct? DELL please fix it in a firmware update allows the user to toggle DSC off. 

  • Vanadiel

    8 Professor

    •

    7094 Posts

    •

    29695 Points

    1

    0

    Posted April 25th, 2024 17:00

    Turning off DSC will result in less bandwidth being available for each monitor. I am not sure of a DSC toggle on that monitor model would make sense, considering the refresh rate.

  • zhoupc

    1 Rookie

    •

    4 Posts

    1

    0

    Posted April 26th, 2024 00:52

    But with DSC how can I use 3 monitors at once?

  • Vanadiel

    8 Professor

    •

    7094 Posts

    •

    29695 Points

    0

    1

    Posted April 26th, 2024 13:11

    @zhoupc​ You can't because of the # of internal heads used with DSC on. It will exceed the # of internal heads available, hence one monitor will not work.

    Without DSC your refresh rates will go down, with DSC you can only drive 2 out of 3 monitors. The problem is with the high refresh rate and the resolution of the monitor, needing X amount of bandwidth per monitor.

    To really fix it you would need DP 2.1 connectivity, but that's only available on Radeon 7000 series video cards and I am not aware of any consumer monitors using DP 2.1 connectivity. Will also require DP 2.1 cables.

    With a DSC toggle you could potentially fix the issue, but you would be locked to a lower refresh rate for sure. 

  • zhoupc

    1 Rookie

    •

    4 Posts

    0

    1

    Posted April 26th, 2024 14:03

    @Vanadiel​ Yeah that's my point. This monitor needs a DSC toggle so I can turn it off when I need it. Or automatically turn off at lower refresh rate. At least give the user option.

  • Baokeyai

    1 Rookie

    •

    3 Posts

    •

    2 Points

    1

    0

    Posted April 7th, 2025 01:06

    Yeah, I'm going to have to return these monitors, because I can't get 3x working. I previously had the Dough 4k 144hz monitors, which all worked perfectly and I'll have to go back to.