Aurora R12, ram error when enabling XMP with 4 ram sticks
I recently bought two more ram sticks for my system. It seems that turning on XMP causes the system to infinitely reboot and giving me four yellow flashes (which I assume means ram error). The system runs fine with it disabled so I was wondering if there is a way to fix this so I don't just leave free performance on the board?
This topic comes up so much there really should be a sticky. Dell OEM HyperX is not the same as aftermarket HyperX. Different timings, voltage and XMP profiles. Dell does not sell their HyperX outside of computer purchase. You have to get all that you want at the time of purchase or find someone selling their Dell HyperX because they bought all new ram.
you can use the DP/N to order from Dell directly (chat with Dell live agent on line and asks them to email you a real picture and hope the sticker info is legible).
Vanadiel
8 Professor
•
7094 Posts
•
29695 Points
2348
0
Posted November 1st, 2021 08:00
4 x 8 is not a validated configuration for the R12. That might be an issue.
Only 2 x 16 is validated for 3200 or 3400 XMP.