UNSOLVED

calvados14000

updated

6 years ago

0

11237

February 1st, 2021 05:00

Aurora R10, SSD M2 NVMe Gen4

Hello,

Want to change from the original ssd (Intel ssdpemkf256G8) to a WD Black SN850 500GB M2 PCIe Gen 4. The interface of the M2 slot on the motherboard is PCIe 3.0x4 or PCIe 4.0x4, before and after Bios 2.1.0 update?

Thank you in advance

  • markburv

    2 Intern

    •

    569 Posts

    6235

    0

    Posted February 1st, 2021 09:00

    hi @calvados14000 

    If you have a Ryzen, the tech specs says PCIe is Gen4 in the Service Manual

    If it is not a Ryzen, Intel have not done the PCIe Gen4 chipset yet.

    I don't know if this means it will run at higher speeds or not than Gen3.

     

  • Vanadiel

    8 Professor

    •

    7094 Posts

    •

    29695 Points

    6213

    0

    Posted February 1st, 2021 13:00

    Besides the service manual, also check knowledge base article https://www.dell.com/support/kbdoc/en-ca/000144170/how-to-distinguish-the-differences-between-m-2-cards

     

    Also, the service manual is not clear about the actual speed of the slot. For some reason most of the slots run at half speed. It does not say if the M.2 runs at full speed, or if it's half speed. It only lists what type of drive it accepts size wise. 22 mm wide and either 30 or 80 long.It would not surprise me if the slot runs at half speed...

    The PCI-Express X16 slot works at X8 lanes only.

    The PCI-Express X4 slot 3 works at X2 lanes only.

    One PCIe/SATA M.2 card slot for 2230/2280 solid-state Drive

     

  • Tesla1856

    10 Wizard

    •

    18086 Posts

    •

    71947 Points

    6201

    0

    Posted February 1st, 2021 15:00

    It should work because any M.2/PCIe/NVMe SSD will work in that slot.

    PCIe v3 or v4 doesn't really matter in this case (it's not like it's a video-card).

    Dell Rockstar

    Microsoft Windows and Apple iOS Developer (Retired)
    - Like many of you, I can appreciate a good game-engine.
    - I answer questions here, but I'm not a Dell employee.
    - Consider giving posts you like a "thumbs-up"
    - Posting models-numbers and software versions speeds trouble-shooting.
    - Click "Mark as Accepted Answer" on any post that answers your question best.

  • r72019

    8 Professor

    •

    5344 Posts

    5588

    0

    Posted February 1st, 2021 17:00

    "referenced support for PCIe on the M2 "

    Edit:  I am referring to pcie 4.0, of course. 

  • r72019

    8 Professor

    •

    5344 Posts

    5603

    0

    Posted February 1st, 2021 17:00

    B550A (i.e., the R10 motherboard) generally should support PCIe 4.0 on one PCIe slot plus the M2 slot.  Keep in mind B550A is a rebrand of B450, so it is AGESA enabled PCIe 4.0 direct to the CPU (hence, only the first x8 and the M2), as opposed to chipset enabled 4.0. 

    Also, keep in mind the x16 mechanical but only x8 electrical is a different aspect. That's separate from the issue of whether it supports PCIe 4.0 (which incidentally is twice as fast). 

    And to your question, I thought the literature referenced support for PCIe on the M2 for some time prior to the update, even as far back as initial release. 

  • Vanadiel

    8 Professor

    •

    7094 Posts

    •

    29695 Points

    4185

    0

    Posted February 1st, 2021 18:00

    He is asking this specifically in reference to PCIe 4.0: PCIe 4.0x4.

    The service manual does not specifically say 4x4. That's why I said it could be like most other slots on this board, who all seem to run at half the speed.

    It makes me wonder if it is PCIe 4.0x4, or PCIe 4.0x2 ?

    He's wondering PCIe 3.0x4,, or PCIe 4.0x4.

     

    The answer is it is PCIe 4.0 according to the service manual, Question is what speed, x2 or x4?

     

    Going by a third party program called HWiNFO64, it looks like this:

    Video Bus: PCIe v4.0 x16 (16.0 GT/s) @ x8 (16.0 GT/s) for the video card, which is correct (version 4.0x8)

    However, for the M2 slot it becomes more interesting:

    It comes off a PCIe GPP bridge, PCIe 3.0 running at 4X, That would indicate PCIe 3.0x4 for the M.2 slot, not PCIe version 4.0.

     

    Is there any official from Dell who can confirm what this bus runs at? PCIe Version and link speed?

     

     

     

  • 6156

    0

    Posted February 1st, 2021 23:00

    hi markburv,

    My R10's CPU is Ryzen 7 3700X, Gen4 is running for CPU and graphic card, but not sur for M2.

  • 3127

    0

    Posted February 1st, 2021 23:00

    Obviously it works, the question is with which speed (difference between 4.0 and 3.0).

  • 4148

    0

    Posted February 2nd, 2021 00:00

    hi @Vanadiel 

    thanks for your replies.

    If HWiNFO64 says "running at 4X", it would be 4X. you checked with a Intel SSD orginal? I think Intel SSD is a 3.0X4, so maybe when a SSD 3.0 is running on slot M2 Gen4, HWiNFO64 will give us this report?

    Meanwhile, I will add a SSD WD SN750 M2 NVMe 1T at bottom PCIe slot with an adapter PCIe-M2 tomorrow. 

  • Vanadiel

    8 Professor

    •

    7094 Posts

    •

    29695 Points

    2382

    0

    Posted February 2nd, 2021 03:00

    Mine has a Samsung NVMe in that slot. It performs really well in benchmarks, but it looks like the slot is PCI-e3.0 and not 4.0?

    It is a Gen 3.0 drive, so maybe that is why it shows PCIe revision 3.0 and not 4.0?

    https://www.samsung.com/semiconductor/ssd/client-ssd/