• r72019

    8 Professor

    •

    5344 Posts

    875

    1

    Posted February 10th, 2021 07:00

    Try removing and then reseating the SSD in the adapter.

  • 850

    1

    Posted February 10th, 2021 16:00

    Thank you for replying.

    I have tried taking it out and reseating it back in. Didn't work for me. While browsing the forums someone had mentioned putting the PC to sleep and then waking it back up shows the drive for them. Guess what, that worked.

    Sad part is I want it to just work. The workaround allows me to use the drive, however this seems to be like a band-aid solution.

    Please advise.

  • Vanadiel

    8 Professor

    •

    7094 Posts

    •

    29695 Points

    840

    0

    Posted February 10th, 2021 17:00

    Can you try checking your windows power plan settings by typing "powerplan" into the windows search box?

    Under show advanced power settings, under PCI Express, there's an option to turn "Link State Power Management" to "off".

    See if that makes a difference.

     

    https://www.sevenforums.com/tutorials/292971-pcie-link-state-power-management-turn-off-windows.html

     

    "Sometimes this mechanism cause a bit trouble during power transitions, specially during sleep. So it may be wanted to turn the Link State Power Management off, if necessary."

  • 832

    0

    Posted February 10th, 2021 17:00

    Hi,

    I went and checked the setting. It was already set to off.

    Thank you for taking the time to help. Really appreciate it.

    Please advise,

    Thank you

  • r72019

    8 Professor

    •

    5344 Posts

    828

    0

    Posted February 10th, 2021 18:00

    Did you have (or was there ever) previously an OS installed on the Inland m2 drive?  If yes, do a diskpart clean on it. 

    If you can see the drive in BIOS another option may be to put your OS drive in the adapter, and move the Inland drive to the m2 slot.  

  • 821

    0

    Posted February 10th, 2021 18:00

    OS was not installed this drive. I cannot see the drive in bios because as soon as I restart it stops showing up. Then I put the PC to sleep and wake it up to use it.

    I will try switching the OS drive in the adapter, and move the Inland drive to the m2 slot.

    - Tried this, the system didn't even boot up.

    FYSA, I have been using this drive in my Alienware R3 15 for 3 months without any type of issues. I just took this out of there and used it in the Aurora with the adapter.

    Please advise,

    Thank you

  • r72019

    8 Professor

    •

    5344 Posts

    792

    0

    Posted February 10th, 2021 22:00

    You might try moving it to a different slot, you can put it on the third or fourth slot.  

    Also, see if there is a firmware update for the SSD.  

    Another option is to try out a different nvme adapter if it's still in its return period. 

      

  • markburv

    2 Intern

    •

    569 Posts

    790

    0

    Posted February 11th, 2021 00:00

    All power plans are defaulted to sleep HDDs after 20mins, sometimes this does not help certain systems, this may be your case, can you @Vampyrchief check this setting too please?

    markburv_0-1612054557980.png

  • 777

    0

    Posted February 11th, 2021 05:00

    @r72019 I did try moving it into a different slot. And the PC didn't even boot up. The second card doesn't even show up in BIOS.

    I have asked for a replacement of the same one for now. If that doesn't work, I will  order a new one. Any suggestions on which one?

    @markburv I have changed the settings as you described. Nothing changed. Still have to put the PC to sleep and wake up to use the hard drive.

    I noticed that whenever I wake the PC up to use the NVME PCIe Card, system notification alerts me that I need to decide what to do with removable media.

    Please advise.

    Thank you.

  • r72019

    8 Professor

    •

    5344 Posts

    626

    0

    Posted February 11th, 2021 07:00

    " I did try moving it into a different slot. And the PC didn't even boot up. The second card doesn't even show up in BIOS."

    You moved the inland drive plus adapter combo to a different pcie slot and the computer didn't even boot? And when can boot the drive is not visible at all in bios or windows until after you wake from sleep. If so, a boot partition may be installed on the inland drive and possibly there's a conflict with the boot drive in your m2 slot.  This happens sometimes if windows is installed when more than one drive is connected to the pc, or the drive was used as a boot drive in the past.  Or if you bought it preowned, or in other than a new sealed box.  If so, you would need to first clean and then format the drive.

    My other thought may be an issue with the adapter or drive.  Either driver or firmware related.