After some searching, I can see I'm not the only one with this issue. I can't seem to find any solution to the problem though. I may have more information to share on the issue:
When I shutdown or reboot from windows 10 gracefully, the next time the XPS13 (9360) boots, it will boot into a Dell Support screen that says "Hard drive not installed" with just one button option to "continue" which shuts down the machine. If I power on the machine after this, the laptop boots normally into windows.
I think this is an issue with Windows 10 or some hardware driver doing something to the hard drive/controller before it shuts down because I am also dual booting Ubuntu and when I shut down from Ubuntu there is no problem, I can boot into windows/ubuntu on the first try after I shutdown from ubuntu.
Does anyone have any idea what could be causing this? Or maybe some windows settings I can play with that might be causing this?
After searching through many forums I have found a solution that finally fixed this issue for me.
Going in and manually updating the SSD firmware from the Dell Support page has fixed my issue.
The SupportAssist and automatic updates don't update the firmware for some reason, so you must do this manually.
However, since updating everything every time I put my xps to sleep and then wake it up, the brightness becomes stuck. Moving the brightness sliders or using the Fn keys has no effect, neither does toggling the night light setting.
After restarting I can change brightness again until I put it to sleep again.
Thank you for your message. I will be glad to assist you on this.
How long have you been having this issue? Have there been any recent Windows updates of BIOS changes done?
What is the version of BIOS installed?
Run a hardware diagnostic by following the video on this link and check if there is an error.
For my reference, please click on the message tab next to your avatar– click “New Message” & search for my Dell username (Dell-Sreejith R) & send a private message with the service tag, registered name & email address.
If you are running a PCIe drive on that system, it may be related to Ubuntu not liking the SATA selection of RAID in the Bios. Could you explain how you installed Ubuntu and what you have for a setting for SATA configuration?
Saltgrass, I have the stock drive that came with my system installed: THNSN5512GPUK, I believe it is a PCIe drive. I don't remember the exact steps I used to install Ubuntu on the machine but it was something along the lines of:
where should I look to get the SATA configuration?
I don't think Ubuntu is the problem since booting and shutting down from Ubuntu has no issues. It is when I shut down from windows that causes the problem. It seems to me like windows does something to the drive when I shutdown from windows and the issue is reversed (fixed) after I reach that dell support screen and do a reboot everytime.
I'm not sure when it started happening, it has been a while now, I have done many bios updates while this has been a problem though (at least 2 from what I remember, maybe more).
Currently, my bios version is 2.8.1. I just ran the diagnostics test and like always, the hard drive was not detected at first until I went to the dell support screen and clicked on continue. Then all the tests ran fine. So the sequence of events was:
1. Reboot from windows
2. At the Dell logo press f12
3. Test ran and stopped because "Hard drive not installed" 4. Reboot
5. Didn't do anything at the Dell logo this time
6. Got the usual Dell support screen with "Hard drive not installed" clicked on "continue" and the laptop powered off
7. Booted the machine and pressed f12 at the Dell logo
If you had needed to change the SATA configuration in the Bios to install Ubuntu, you would remember that, right?
I am thinking your system is changing controllers on the drive, but I do not know for sure.
You might open the Device Manager and look down to the Storage Controllers and see what exactly is showing for the Drive controller. It is probably some form of SATA controller but we need the exact description to see if you have updated it.
How are you booting the System, through a boot menu or selecting one install or the other from the Bios? If you boot Windows twice in a row, does it boot normally the second time?
I am not sure how to check your devices in Ubuntu but if you could find out what controller it is using it might help explain what is happening. Ubuntu likes to run a PCIe drive using the PCIe driver where Dell installs the PCIe drives so they use the Intel controller.
Sorry, but I am not sure exactly what needs to be done. Since I don't use Ubuntu that much the Grub situation could be masking a problem related to booting. When I install Ubuntu, I install it as UEFI and select that boot option with the F12 key during boot so I don't need Grub.
There is an Ubuntu forum on this site, you might ask them. If you installed Ubuntu as a Legacy install, that could lead to all sorts of problems. Your description of what you see just makes me think the system is trying to boot Windows as AHCI but can't find the SATA driver for it to boot with.
Dell Support during boot will not show a PCIe/NVMe drive being present since it appears that software was never given that option. The second boot may be able to reset the driver to one which will work.
Rytistam
3 Posts
31637
6
Posted June 27th, 2019 14:00
After searching through many forums I have found a solution that finally fixed this issue for me.
Going in and manually updating the SSD firmware from the Dell Support page has fixed my issue.
The SupportAssist and automatic updates don't update the firmware for some reason, so you must do this manually.
However, since updating everything every time I put my xps to sleep and then wake it up, the brightness becomes stuck. Moving the brightness sliders or using the Fn keys has no effect, neither does toggling the night light setting.
After restarting I can change brightness again until I put it to sleep again.
If anyone knows of a solution, let me know lol