I think I got the point. First, update to the latest BIOS. Then get in the BIOS and click restore settings, choose "BIOS default settings"(not the “factory settings”). After that my M.2 on board got a full speed.
Thanks for links, the system -drivers and firmware- is updated. The youtube video gives slightly better results, but I think not enough, it seems very strange that a nvme drive could give these results. I think I will try connecting other nvme ssd, I think it may be so slow because of motherboard instead of ssd. I would thank other opinions, it seems very strange nobody has noticed this issue.
@akedna Dell frequently installs components, like SSDs, from different OEMs, so I guess it depends on how many users have the same Hynix SSD you have and have tested the speed.
The XPS 8940 specs say the M.2 NVMe slot is PCIe Gen3.0 x4 , up to 32 Gbps, if that's of any help. What are the actual specs for your SSD?
Which CPU, how much RAM, and what GPU are in this system? All of those can impact SSD performance.
Read this about possible causes for slow SSD performance and things to check. NOTE: #3 at that site talks about the BIOS AHCI setting being disabled. Dell typically installs Windows on the XPS 8940 with BIOS SATA Mode set to RAID, rather than AHCI, but you can't just change that setting to AHCI in BIOS directly. You have to follow specific steps to make the change, otherwise Win 10 can become unbootable and you'd probably end up having to do a clean install. So just check that BIOS setting, but don't change it for now. We can give you the steps to do this properly, if BIOS is actually set to RAID and you want to try AHCI...
humm, thanks @Vic384 , it seems true, from other post:
Many Dell Systems come with NVMe drives being controlled by the Intel SATA/PCIe controller. For the M.2 slot to function in that manner, the SATA controller in the Bios needs to be set to RAID.
You can change the controller using a special procedure but the performance with the newer Intel SATA/PCIe Premium controller is almost as good as using the NVMe controller.
@akedna Yes, as @Vic384 said, we've had experience with Samsung SSDs that don't play nicely with BIOS set to RAID. And you're seeing performance issues with this Hynix SSD, and BIOS is likely set to RAID.
It won't hurt to change BIOS to AHCI, as long as you do it properly. And you can always go back to RAID if AHCI makes performance even worse than with RAID, as long as you do it properly.
You might try contacting Hynix tech support so see if they have anything to say about RAID vs AHCI or about the performance of your SSD...
I have the same problem brand new XPS 8940 came with Samsung PM9A1 (capable of 7000 MB/s) and I'm getting 900 MB/s using Crystal Disk Mark and the same using PerformanceTest. 3 Pro Support people could not help. It's a newly designed mother board. Maybe that's the problem. Hopefully Dell will respond as I seen 3 or 4 of these identical threads for the 8940.
frontieer
1 Rookie
•
2 Posts
12032
12
Posted May 24th, 2021 09:00
I think I got the point. First, update to the latest BIOS. Then get in the BIOS and click restore settings, choose "BIOS default settings"(not the “factory settings”). After that my M.2 on board got a full speed.