UNSOLVED

ayrton7

updated

19 years ago

A

ayrton7

11 Posts

0

6110

July 13th, 2007 17:00

Vista x64 on Dim 8400 MUCH SLOWER: any idea?

I upgraded my Dimension 8400 to Vista x64 hoping it would take advantage of the 64 bit CPU I have... tough experience so far. I have as many 64 bit drivers as I found on the Dell site and the manufacturers. The system is stable and that's already something. But performance is very bad. Burning DVDs takes 3x more time than XP x86. Saving DVDs takes also 3x more time. Disk IO seems to be pretty sloppy, despite getting a 5.2 on the Windows Vista Performance Index. I've got a SATA 160GB drive, which shouldn't be too bad on a brand new and clean image. Also put 2GB of fresh DDR2 RAM, it helps a bit but the bottleneck seems to be IO. Adobe Photoshop takes forever to load and operate. Frequently showing "not responding" for several seconds to perform basic tasks. Have you all seen something similar? Any guidance on what to do to improve IO? I went to Seagate's site and they said no 64 bit driver is needed from them. Thanks Nick
  • Mary G

    6 Operator

    •

    20095 Posts

    169

    0

    Posted July 13th, 2007 18:00

    I have an 8400 that runs Vista 32 bit fine. I don't think this 2+ year old computer has the hardware to run Vista 64 bit well. Besides, there is very little out there that needs 64 bit.
  • C3PO5

    2 Intern

    •

    2693 Posts

    169

    0

    Posted July 13th, 2007 21:00

    Hi Nick
    You do not need to have a driver for the chip set it is on the Vista 64 bit DVD.
    Go to the bios and make sure it is set to Raid Autodetect/AHCI.
    The Dimension 8400 is very well suited to run Vista 64 bit & Windows XP Pro 64 bit.
    If you know where to find the drivers if i can remember right the only driver i had to
    find was the soundmax ADI driver and it came from the 670 work station from Dell
    using the XP Pro 64 bit driver .
    Most burning software does not work well with 64 bit so you need to find one
    that is Vista 64 bit ready the one i use is roxio creator 9 it works just fine .
    Mary
    When Vista was in the bata stage the D8400 was one of the new systems one the market
    [then] so how can it not run 64 bit well ?
    You may need to rethink what you tell people on this.
    My D8400 runs Vista with no problems at all !!
    See Yea
     
  • Rebel9

    1 Rookie

    •

    2856 Posts

    169

    0

    Posted July 13th, 2007 23:00

    C3PO5,
     
    "Mary
    When Vista was in the bata stage the D8400 was one of the new systems one the market
    [then] so how can it not run 64 bit well ?
    You may need to rethink what you tell people on this"
     
    You've been around long enough to know that Mary's NOT going to respond to this. Does she EVER respond when she's challenged?? No, Mary just keeps dropping her "facts" and moves on. Too bad, because some of her information is actually useful, but much of it is simply opinion and Mary's version of "facts".


    Message Edited by Rebel9 on 07-13-2007 08:51 PM
  • C3PO5

    2 Intern

    •

    2693 Posts

    169

    0

    Posted July 14th, 2007 00:00

    Hi Rebel9
    Mary does not need to respond to this she has her opinion on things but seem to forget that
    most PC,s that were built 2 years ago was tested with Vista 32\64 bit bata where
    the PC,s built now was not even around for testing then.
    So the idea of rethinking is a valid move. 
     
    If the OP needs more help i will try to help you , i do not have photo shop to test but may try to get it and see what will happen with it .
    One thing i can think of is go to device manager and right click on the chip set drivers and select update and see if windows can update it .
    I know when i first started using 64 bit Vista i had the old drivers and my PC was very slow to respond it updated and it ran a hole lot faster after a reboot.
    I think the mistake i made was loading the Old driver from the start of installing Vista 64bit
    in driver options , when a new one was on the DVD to start with !
     
    See Yea!
     
    Edit is your version of Adobe Photoshop Vista 64 bit ready i see a lot of there versions
    will not work with Vista 32\64 bit . 


    Message Edited by C3PO5 on 07-13-2007 07:54 PM
  • 169

    0

    Posted July 14th, 2007 02:00

     


    Message Edited by kpo127 on 07-21-2007 03:40 PM