UNSOLVED

Ice Cream

updated

22 years ago

0

3525

January 16th, 2005 16:00

Reinstallation Problems

Hi Everybody,
When I bought my computer I reinstalled OS on it with Windows XP Professional Edition. After I noticed that perfomance of my computer has changed. It has become slower than used to be. For example, when I drag an object with mouse over display it didn't move fast and smoothly. I checked out all hardware & software devices. They worked properly. Then I decided to change OS on my computer with Dell Windows XP Home Edition Reinstallation CD which came with my computer. No changes. The computer was still slow. And, some time ago I don't know how but I managed to properly install OS on my computer with the same Dell Windows XP Home Edition Reinstallation CD. Computer started performing better like it did when I just got it from Dell. After while I experienced some problems with Norton Anti-Virus software on my computer. It made me to reinstall OS on my computer again. I used the same Dell Windows XP Home Edition Reinstallation CD. My computer has slowed down again. I even tried to do a clean-install by following the instructions described on  http://www.djdenham.com/Install%20Procedures.htm but everything was in vain. Now I can figure out right away without installing video card or some other softwares if OS is installed properly on my computer or not. I just open Solitare game or any other window in minimized size and start moving it over display. If the picture of moving object is jerky and it leaves slightest traces behind so the OS installation is failed.
 
Please, give me your comments.
Thanks a lot.
 
 
04/21/2004
Dimension 8300
Pen4 at 3.0 GHz
512MB DDR SDRAM at 400 MHz
128MB DDR ATI RADEON 9800 PRO Graphic Card
120GB Serial ATA Hard Drive (7200 RPM)
              
  • GreyMack

    2 Intern

    •

    2190 Posts

    68

    0

    Posted January 16th, 2005 21:00

    When a Repair install of Windows doesn't cure a problem, and no other solution appears viable, a Clean install of Windows is often necessary.
    After a clean Windows XP install, several drivers may need to be installed, starting with the Chipset, then the Video Adapter, and so on. Refer to the Dell Reinstall Guides for detailed procedures.
     
    The Reinstall Guides are under the Product Support menu at the top-left of this page, or you can use the link below to go directly to the Dimension 8300 reinstall procedures.
     
    Updated drivers, utilities, and some application updates are also available under the Product Support tab, in the Downloads area, or you may use those on the CD included with your system. This is the direct link to the downloads for the Dimension 8300 using XP.
     
    Note that you only need some, not all, of the drivers listed for your Dimension 8300 using XP. The Troubleshooting area under Product Support includes tools to determine your Current System Configuration, which will help determine which drivers you need. There is also a report of the Original System Configuration, and in the User Guides you will find owner and Service Manuals.
     
    I am hoping the detailed Dell Reinstall Guides for the Dimension 8300 with Windows XP will help cure the problem.
     

    GM