UNSOLVED

Blake and Sherr

updated

20 years ago

0

3727

March 25th, 2007 21:00

Installing Windows XP Pro

Trying to reinstall Windows XP Pro.  Not far into the reinstallation a blue type site comes up stating that a problem has developed and windows XP is
shutting down.  It suggests that I run my AVG anti-virus program and also the Check disc program. I did, but alas there were no viruses to purge and the check disc program completed with no problems.
 
Problem continues and each time I insert the Windows XP Pro disc the same blue type screen appears. So I am at a stopping point with respect to reinstalling Windows XP Pro.
 
Any suggestions to fix this problem would be most appreciated.     Blake
 
 P.S.  I should add that the error message is:
Ox0000007B  0xF78D2524  0xC0000034  0x00000000  0x00000000      


Message Edited by Blake and Sherry on 03-25-2007 06:34 PM
  • mombodog

    2 Intern

    •

    12735 Posts

    629

    0

    Posted March 25th, 2007 21:00

    "Ox0000007B"  you sure this is the correct error?  this error code is
    0x0000007B: INACCESSIBLE_BOOT_DEVICE
  • RoHe

    12 Elder

    •

    45230 Posts

    •

    172625 Points

    629

    0

    Posted March 26th, 2007 01:00

    What system is this? You may have to run BIOS setup and change the HD setting from "RAID" to "RAID Autodetect/ATA"

    Ron
  • 629

    0

    Posted March 26th, 2007 20:00

    1.  Yes, 7B is the correct error message, but on 3rd or 4th time of starting the computer the Windows XP managed to run completely.
     
    2.  However, now on startup of the computer the XP CD starts to run even though the CD is not in the computer.  It then goes to the 7B error message unless I am quick enough to use the up arrow to go from
    Windows XP startup to Windows XP Professional.
     
    Is there a way I can prevent this from happening?
     
    3.  And when it goes to Windows XP Professional it looks as though I have reverted to my original installation instead of a new installation.
     
    4.  Can I get to running BIOS setup from the computer or do I need to run a CD ?  And which one - the BFG Tech CD (NVidia drivers) or
    the ASUS CD (motherboard - NVidia nForce 4 SLI Series Support?
     
    5.  I am in RAID 0.  How do I change to RAID Autodetect /ATA?
     
    Hope I have clearly asked all of my questions.  Thanks for your help.   Blake
  • mombodog

    2 Intern

    •

    12735 Posts

    629

    0

    Posted March 26th, 2007 21:00

    Is this a Dell PC, if it is what model? Please!
  • 629

    0

    Posted March 26th, 2007 23:00

    No, it is not.  I decided on the individual parts and had it put together by
    KC Computers.  
  • 629

    0

    Posted March 26th, 2007 23:00

    No, it is not.  I decided on the individual parts and had it put together by
    KC Computers. 
  • 629

    0

    Posted March 26th, 2007 23:00

    No, it is not.  I decided on the individual parts and had it put together by
    KC Computers.    Blake
  • mombodog

    2 Intern

    •

    12735 Posts

    629

    0

    Posted March 27th, 2007 00:00

    This is a Dell user to user forum, you may not get much help here for a non Dell Pc.