everytime i try to run this on my c drive it says
it is aborted due to inconsistencies that have been detected in the file system. i should run CHKDSK to repair these inconsistencies and run fragmentor again.
i run chkdsk and it tells me
F parameter is not specified running chqdsk in read only mode.
When you run Chkdsk, make sure you check the box to allow automatic fix of errors. The program will run and probably give a message that Chkdsk needs to run at the next bootup to fix errors. OK this and reboot and see what happens. Chkdsk needs to run outside of windows to repair errors.
personally (at least with an NTFS filesystem) I like chkdsk c: /v /f so you can see what's it's doing.
generally, for any dos commands, you can type the command and /? in order to get a list of switches that work with the command.
for instance, chkdsk /? produces the following:
C:\chkdsk /?
Checks a disk and displays a status report.
CHKDSK [volume[[path]filename]]] [/L[:size]]
volume Specifies the drive letter (followed by a colon),
mount point, or volume name.
filename FAT/FAT32 only: Specifies the files to check for fragmentation
.
/F Fixes errors on the disk.
/V On FAT/FAT32: Displays the full path and name of every file
on the disk.
On NTFS: Displays cleanup messages if any.
/R Locates bad sectors and recovers readable information
(implies /F).
/L:size NTFS only: Changes the log file size to the specified number
of kilobytes. If size is not specified, displays current
size.
/X Forces the volume to dismount first if necessary.
All opened handles to the volume would then be invalid
(implies /F).
/I NTFS only: Performs a less vigorous check of index entries.
/C NTFS only: Skips checking of cycles within the folder
structure.
The /I or /C switch reduces the amount of time required to run Chkdsk by
skipping certain checks of the volume.
kirkd
6 Operator
•
5241 Posts
570
0
Posted November 15th, 2006 16:00