We have change address IP for the CS with succes, but when we try to change on SP we have an error :
script block after change IP adress from SPA
[root@GR-DC2-EMC-01 nasadmin]# /nas/sbin/clariion_mgmt -stop Checking if running as root...yes Checking if model is supported...yes Checking if integrated system...yes Checking if interface eth3 is configured...yes Checking if SP (10.17.11.4) is up...yes Checking if SP (10.17.11.5) is up...yes Checking if CS IP address matches domain record...yes Step 1/12 [28185788417]: Changing SPA IP address. Changing SPA IP from 10.17.11.4 to 128.221.252.200 (subnetmask 255.255.255.0, gateway 128.221.252.104) Step 2/12 [28185788421]: Waiting for SPA to restart. Waiting for SPA to go down.....done (19 secs) Step 3/12 [28185788425]: Waiting for ping response from SPA. Waiting for 128.221.252.200 to respond...done (2 secs) Step 4/12 [28185788427]: Waiting for VNX OE for Block software to start on SPA. Waiting for VNX OE for Block software to start on SPA...done (56 secs) Waiting until SPB sees 128.221.252.200 in the domain....................................................................................Error 30 [15300888558]: Error trying to change IP address of the SP WARNING: This error may have caused the network settings to be in an inconsistent WARNING: state. This utility must be run again with the '-retry' flag to WARNING: re-attempt this operation.
thanks for your answer, yes i 've tried with the flags, but it doesn't work.
[root@GR-DC2-EMC-01 nasadmin]# /nas/sbin/clariion_mgmt -stop -retry Step 1/12 [28185788417]: Changing SPA IP address. Step 2/12 [28185788429]: Updating VNX for File database with SPA IP address Adding rules to allow outbound traffic from SPB Updating SYMAPI database with new Block IP addresses...........failed to update database
Changing IP address for CKM00150601030
Discovering storage on GR-DC2-EMC-01 (may take several minutes) Error 13422231563: The storage array CKM00150601030 requires security credentials. Error 4201: invalid IP address: 128.221.252.200 Error 38 [15300888566]: Failed to update SYMAPI DB. WARNING: This error may have caused the network settings to be in an inconsistent WARNING: state. This utility must be run again with the '-retry' flag to WARNING: re-attempt this operation. [root@GR-DC2-EMC-01 nasadmin]# /nas/sbin/clariion_mgmt -stop -retry Step 1/12 [28185788417]: Changing SPA IP address. Step 2/12 [28185788429]: Updating VNX for File database with SPA IP address Adding rules to allow outbound traffic from SPB Updating SYMAPI database with new Block IP addresses...........failed to update database
Changing IP address for CKM00150601030
Discovering storage on GR-DC2-EMC-01 (may take several minutes) Error 13422231563: The storage array CKM00150601030 requires security credentials. Error 4201: invalid IP address: 128.221.252.200 Error 38 [15300888566]: Failed to update SYMAPI DB. WARNING: This error may have caused the network settings to be in an inconsistent WARNING: state. This utility must be run again with the '-retry' flag to WARNING: re-attempt this operation. [root@GR-DC2-EMC-01 nasadmin]#
DELL-Josh Cr
Community Manager
•
9798 Posts
•
45341 Points
1018
0
Posted November 2nd, 2020 12:00
Hi Seb,
Does the retry flag help at all? You may also want to try rebooting that SP.